Panasonic DMR-E51 - Manual (Page 66)

66
Troubleshooting guide (continued)
Displays
Play
Remote control
The display is dim. ≥Go to Display in the SETUP menus and change the display’s brightness with “FL Display”.
(page 53)
“0:00” is flashing on the unit’s
display. ≥The clock is not set.
Go to Settings in the SETUP menus and set the clock with “Clock”. (page 56)
“NO READ” appears on the unit’s
display after using a lens cleaner. ≥Take the cleaner out of the unit.
Play fails to start even when [ 1]
(21) is pressed.
Play starts but then stops
immediately.
“NO READ”, “UNSUPPORT”, “NO
DISC” or “NO PLAY” appears on
the unit’s display.
≥Insert the disc correctly with the label facing up. (page 13)
≥This unit cannot play discs other than DVD-RAM, DVD-R, DVD-Video, Video CD, CD and MP3
disc. (page 8)
≥The disc is dirty. Clean it. (page 60)
≥The disc may be badly scratched. (page 60)
≥You inserted a blank DVD-RAM or DVD-R.
No response when buttons
pressed. ≥If “ ” appears on the television
the operation is prohibited by the unit or disc.
≥If the unit is not operating at all, press [ , TIMER] (12) to switch the unit to standby, then press
[ , TIMER] (12) again to turn the unit on. The unit may not be operating correctly due to
lightning, static electricity, or some other external factor.
≥The Child Lock function is activated. (page 46)
A title or chapter doesn’t play
when it is selected. ≥Some titles and chapters on DVD-Video are not played when you have changed the ratings
level. (page 54)
Picture distorted during search. ≥Some distortion is normal.
Alternative soundtrack and
subtitles cannot be selected. ≥The languages are not recorded on the disc.
≥You may have to use the disc’s own menus to select languages.
Soundtrack/subtitle language not
the one selected with the SETUP
menus. ≥The language is not recorded on the disc. (page 51)
No subtitles. ≥Subtitles are not recorded on the disc.
≥Turn the subtitles on. (page 43)
Angle cannot be changed. ≥This function depends on software availability. Angles can only be changed during scenes where
different angles are recorded (“ ” appears on the display).
You have forgotten your ratings
password. ≥Return the unit's settings to the initial state (factory setting).
With the tray open, keep pressing [ :/6] and [5/9] (42) on the main unit
simultaneously for 5 or more seconds.
The remote control doesn’t work. ≥The unit is on standby to make a timer recording (“ ” on the unit’s display is on). (page 24)
≥[DVD, TV] (15) is not switched to “DVD”.
Switch to “DVD” when operating this unit. (page 7)
≥The remote control code is wrong.
Change to the correct code. (page 55)
≥The batteries are depleted. Replace them with new ones. (page 7)
≥Point the remote control at the remote control sensor on the main unit. (page 7)
≥Remove obstacles from between the remote control and main unit.
≥The Child Lock function is activated. (page 46)
Cannot operate the television. ≥The remote control code is wrong.
Change to the correct code. Some televisions cannot be operated even if you change the code.
(page 7)
≥[DVD, TV] (15) is not switched to “TV”.
Switch to “TV” when operating the television. (page 7)
DVD(PAL).book 66 ページ ２００３年５月２２日 木曜日 午後１２時３分