Panasonic SC-DT310 EN - Manual (Page 24)

RQT6924
24
Disc operations
Using GUI (Graphical User Interface) screens
Unit information
Picture menu
To change the user mode
1 Select User mode and press [1] to highlight the number.
2 Press [3, 4] to select “1”, “2” or “3”.
U3:
[For\Southeast\Asia,\Australia\and\N.Z.]
U1: MPEG D.N.R. (Digital Noise Reduction)
U3
480
Picture mode [RAM] [DVD-A] [DVD-V] [VCD] [JPEG]
≥ N: Normal mode
≥ S: Soft mode (Soft picture with fewer video artifacts)
≥ F: Fine mode (Details are sharper)
≥ C1: Mellows images and enhances detail in dark scenes
≥ C2: Sharpens images and enhances detail in dark scenes
≥ U1/U2/U3: User mode ( ➡ below)
Video output mode [RAM] [DVD-A] [DVD-V] [VCD] [JPEG]
≥ 480I: Interlace video
≥ 480P: Progressive video (“PROGRESSIVE” is on)
Transfer mode [RAM] [DVD-A] [DVD-V] [VCD]
Select the method of conversion for progressive output to
suit the type of material being played.
≥
Auto 1 (normal): for viewing film material
≥ Auto 2: for viewing film material (the same as Auto 1,
but able to convert 30-frame-per-second progressive video)
≥ Video: for video material
1
2
3
1 5 4 6 7
U 1 0 0 0 0
1 : ; <
U2 0 0 0 0 0
9 8
8
9
:
;
<
Contrast (s7 to i7)
Increases the contrast between light and dark parts of the
picture.
Brightness (0 to i15)
Brightens the picture.
Sharpness (s7 to i7)
Adjusts the sharpness of the edges of the horizontal lines.
Color (s7 to i7)
Adjust the shade of the picture’s color.
Gamma (0 to i5)
Emphasis of outlines.
Depth Enhancer (0 to i4)
Reduces the rough noise in the background to give a
greater feeling of depth.
3D-NR (0 to i4)/Dot NR (On)
Reduces overall noise/Reduces the dot noise that occurs
at the borders between colors.
Block NR (0 to i3)
Smoothes block noise.
Mosquito NR (0 to i3)
Reduces the smudging that appears around contrasting
sections of the picture.
4
5
6
7
U 1
Display menu
[For\Southeast\Asia,\Australia\and\N.Z.]
4:3 Aspect
[RAM] [DVD-A] [DVD-V] [VCD] [JPEG]
Select how to show images made for 4:3 aspect screens
on a 16:9 aspect television.
≥
Normal: laterally stretches images made for a 4:3
screen.
≥ Auto: expands suitable 4:3 letterbox images to fill more
of the screen. Other images appear in full in the center of
the screen.
≥ Shrink: images appear in the center of the screen.
≥ Zoom: expands all images to fill the screen.
If your television has a similar feature, use it instead for a
better effect.
Zoom [RAM] [DVD-A] [DVD-V] [VCD] ( ➡ page 18)
Subtitle Position/Brightness [DVD-A] [DVD-V]
≥ Position (0 to s60): in 2 unit steps
≥ Brightness (Auto § /0 to s9)
§ The brightness adjusts automatically against the
background.
Bitrate display on/off [RAM] [DVD-A] [DVD-V] [VCD] [
During play: shows the bitrate(approximate values) of the
video being played
While paused: shows the data volume of the frame and
type of picture ( ➡ page 37, Glossary–
I/P/B)
OSD brightness (s3 to i3)
Adjust the brightness of the on-screen displays.
1
2
3
4
5
2 3 4 5
0 x1.00
1
Normal 0 0 OFF
9.438 Mbps
Bit rate
Cur. 7.507 Mbps
Ave. 6.730 Mbps
5.0
Mbps
[2, 1]
A record of bitrates for
a sample period.
Average bitrate
Current bitrate
480
Only when “PROGRESSIVE” is on
1—3 (
➡above)
U2
e.g.) [For\Southeast\Asia,\Australia\and\N.Z.]
Only when “PROGRESSIVE” is on
Audio menu
1 2
OFF OFF/48kHz
Double re-master [RAM] [DVD-A] [DVD-V] [CD] [WMA] [MP3]
( ➡ page 29)
Dialogue Enhancer on/off [DVD-V]
(Discs where the dialogue is recorded in the center
channel)
This makes the dialogue in movies easier to hear.
1
2
23: [For\Southeast\Asia,\Australia\and\N.Z.]