Panasonic SC-DT310 EN - Manual (Page 28)

RQT6924
28
Sound field/sound quality operations
Custom Sound Memory — Store
the sound settings
[DVD-A] [DVD-V] [VCD] [ [CD] ]
Store the sound settings for a disc so the unit recalls them the next
time you play it.
≥
Number of discs: 30
≥ Settings: Dolby Pro Logic II, Subwoofer level, Center focus, Sound
filed control
∫ Storing the settings
1 Make the settings.
2 Press and hold [C.S.M].
∫ Recalling the settings
The unit recalls the settings when you play the disc again.
To check the settings
While the CSM indicator is on
Press and hold [C.S.M].
The settings appear for a few seconds each.
≥ The settings are replaced if you change them.
≥ When you store settings for a 31st disc, the earliest settings disap-
pear.
≥ Press [C.S.M] while “CSM” is lit and the settings return to those that
were on before you stored the settings.
≥ Press [C.S.M] while “CSM” is out and you are playing a disc for
which you stored settings and those settings are recalled.
Adjust speaker delay for input
from external sources, such as
Dolby Digital from a digital
receiver or Dolby Pro Logic II
from a video cassette player.
Adjust the delay time for the
DVD/CD player in the SETUP
menus (
➡ page 33).
1 Press [DELAY TIME].
Each time you press the button
Sch
()Cch
“Cch” appears only when using the optical cable for receiving
Dolby Digital (
➡page 34).
2 Press [3,4] to adjust.
Values
If distance
a or b is greater than or equal to distance c, set to “0”.
If distance a or b is less than distance c, set as follows.
a Center speaker b Surround speakers
(When Dolby Digital is being
received)
CSM
Sound field
Sound Field Control
Press [SFC] to select a setting.
Each time you press the button:
HEAVY:
Adds impact to rock.
CLEAR: Clarifies higher sounds.
SOFT: For background music.
HALL: Expands sound to make you feel like you were in a hall.
MANUAL: ➡ below
FLAT: Canceled (no effect is added) (factory preset).
In MANUAL
You can select LOW, MID, or HIGH, and then adjust them in a range
between – 3 and i3.
1 Press and hold [SFC] until the setting appears.
2 Press [2, 1] to select LOW, MID, or HIGH.
3 Press [3,4] to choose a level between – 3 and i3.
Repeat steps 2 and 3 to adjust the sound quality to your taste.
Center Focus
(Discs where the dialogue is recorded in the center channel)
You can make the sound of the center speaker seem like it is coming
from within the television.
Press [C.FOCUS].
Each time you press the button:
CENTER FOCUS (ON)
()OFF
≥ This will have less effect when Dolby Pro Logic II is turned on.
≥ This feature does not work for some discs.
SUBWOOFER
LEVEL
SFC
C.FOCUS
C.S.M
AUDIO ONLY
DELAY TIME
AV SYSTEM
SLEEP
GROUP
REPEAT/
MIX 2CH
PLAY MODE/
P.MEMORY CANCEL
SKIP
CH
TOP MENU
DISPLAY
VOLUME
MUTING
FL DISPLAY AUDIO ONLY C.FOCUS
C.S.M
SFC
SUBWOOFER
LEVEL
FM MODE
SETUP
CH SELECT TEST DELAY TIME
RETURN
TV VOL s TV VOL r
DIRECT
NAVIGATOR
PLAY LIST
MENU
SLOW/SEARCH
S 10/- / --
1 2 3
4 5 6
7 8
0
9
TV/AV TUNER DVD
TV VCR
BAND CD
AUX EXT
ENTER
PL
RDS
DOUBLE
RE-MASTER
3 , 4, 2, 1
ENTER
DOUBLE
RE-MASTER
SFC
CF
Changing the delay time of the AV
control receiver
Setting
5 ms
10 ms
15 ms
Difference
75– 225 cm
226– 375 cm
376– 525 cm
Setting
1 ms
2 ms
3 ms
4 ms
5 ms
Difference
15– 45 cm
46– 75 cm
76– 105 cm
106– 135 cm
136– 165 cm
When you change the surround speaker setting for Dolby Digital, the
setting also changes for Dolby Pro Logic II.
E.g., the setting for MUSIC is the same as that for Dolby Digital.
Dolby Digital
Dolby Pro Logic II
0 ms
10 ms
0 ms
MOVIE
MUSIC
5 ms
15 ms
5 ms
10 ms
20 ms
10 ms
15 ms
25 ms
15 ms
LS RS
L R
SW
b
c
a
C