Panasonic BT-3DL2550E - Manual (Page 38)

38
Main Menu
(continued)
_ Functions and operating status displayed on screen when FUNCTION buttons are pressed
Pressing any of the [FUNCTION1] to [FUNCTION5] buttons displays the operations assigned to each button as
shown below.
• HV DELAY
DELAY OFF, H DELAY, V DELAY, HV DELAY
• AUTOSETUP
COMP.AUTOSETUP, COMPLETE, INCOMPLETE,
NOT RGB-COMP.CH
• BLUE ONLY
BLUE ONLY ON, BLUE ONLY OFF
• GAMMA SELECT
GAMMA STANDARD, GAMMA FILM,
GAMMA STDIO/PST
• COLOR SPACE
COLOR SPACE SMPTE-C (EX),
COLOR SPACE EBU (EX),
COLOR SPACE SMPTE-C, COLOR SPACE EBU,
COLOR SPACE ITU-709, COLOR SPACE WIDE1,
COLOR SPACE WIDE2, COLOR SPACE WIDE3
• SD ASPECT
4:3, 16:9
• SCAN
NORMAL SCAN, UNDER SCAN
• TWO WINDOW
SINGLE MAIN, TWO L/S, TWO M/M, TWO S/L,
STILL, SINGLE SUB
• SUB INPUT SEL.
VIDEO, SDI1, SDI2, YP
B
P
R
/RGB, DVI-D
• MARKER
MARKER OFF, 4:3 MARKER, 13:9 MARKER,
14:9 MARKER, VISTA MARKER,
CNSCO MARKER, 95% MARKER, 93% MARKER,
90% MARKER, 88% MARKER, 80% MARKER,
××% MARKER (××% indicates an 80 to 100%
USER setting),
MARKER ON
16:9 MARKER value / 4:3 MARKER value
*1
• LEVEL METER
METER OFF, METER 2CH, METER 4CH,
METER 8CH
• CROSS HATCH
CROSS HATCH HIGH, CROSS HATCH LOW,
CROSS HATCH OFF
• MONO
MONO ON, MONO OFF
• TIME CODE
LTC, VITC, LUB, VUB, TC OFF
• CLOSED CAPTION
CC1, CC2, CC3, CC4, CC OFF
• ANAMO
ANAMO ON, ANAMO OFF
• 3D INPUT TYPE
SIMUL, LINE BY LINE, SIDE BY SIDE
• SIMUL MODE
LINE BY LINE, OVERLAY, SDI1(L), SDI2(R),
COMPARISON
• H MIRROR
MIRROR ON, MIRROR OFF
*1 When both 16:9 and 4:3 are set in the marker setting, the 16:9 value is displayed in the first half, and the 4:3 is
displayed in the second half.
_ Functions displayed only when in 2D or 3D mode
Certain functions displayed when the FUNCTION button is pressed are only displayed in 2D or 3D mode.
• Functions not displayed in 3D mode.
HV DELAY, AUTOSETUP, TWO WINDOW, SD ASPECT, SCAN, SUB INPUT SEL, CLOSED CAPTION,
ANAMO
• Functions not displayed in 2D mode.
3D INPUT TYPE, SIMUL MODE, H MIRROR
_ “HV DELAY”
This displays the blanking period. Each press of the button changes the display as follows: “H blanking display”
J “V blanking display” J “H and V blanking display” J “no blanking display.” 2D ONLY
BT-3DL2550PE(VQT2U10)_E.book 38 ページ ２０１０年７月８日 木曜日 午後２時１２分