PYLE Audio PLD175TBT - Manual (Page 10)

Initial System Start-Up
Be sure to press the
button (1)
when using the unit for the first time, after
all connections are completed correctly.
1. Turn off the unit power.
2. Press
with a ballpoint pen or
similar pointed object.
Turning Power On And Off
Turn on the unit by pressing any button
(except
button (3) and button (5)) or
inserting a disc to disc slot (4).
When system is on, press
button (2) to
turn off the unit.
Loading/Removing a Disc
1. Press
button (3) to flip down the
front panel.
2. Insert the disc into the disc slot (4) with
the printed side facing up; the player will
play the disc automatically.
Adjusting sound quality
Rota the button (6) or press
button (6) to adjust the volume level.
Adjusting Bass /Treble /Balance
/Fader/EQ/Loud/Subwoofer
1. Press
button (6) repeatedly to
choose the desired mode.
Press button (36) and then press
button (29) to choose the desired
mode.
Each pressing the button changes the
modes as follows:
RESET
RESET
VOL VOL
(+/-)
VOL
Remote control operation:
Menu
Whenever press button (5) to eject the
disc.
-
te
-
Adjusting the volume level
VOL BASS TREB BAL
EQ LOUD SUBW
Volume level:00 ~ 63
Bass level: -07 ~ +07
Treble level: -07 ~ +07
Balance: 15L ~ 15R
Fader: 15R ~ 15F
EQ: Flat, Classic, Pop, Rock
Loudness: ON/OFF
FAD
General Operation
7
Using The Detachable Front Panel
1.Press the Open button (3) to flip
down the front panel.
2.Grasp the right side of the front panel,
then gently push the front panel towards
the left side before pulling it out from the
unit.
3.Store the front panel in the protective
case provided for safe keeping.
REMOVING AND PROTECTING
DETACHABLE FRONT PANEL.
FRONT PANEL
PROTECTIVE CASE
front panel
open button
The front panel of the unit may be removed
as a theft deterrent. After removing the front
panel, use the case provided to keep the front
panel from getting damaged.
1
2
TO ATTACH THE FRONT PANEL
Hold the right side of the front panel with
the plate facing down.
First attach the left side of the front panel
to the unit by inserting the hole into the left
holder.
Then slightly push it leftwards and attach
the right side hole into the right holder.
Finally push up the front panel.