PYLE Audio PLD175TBT - Manual (Page 18)

When you insert a data disc including
audio (MP3), movie (MPEG), picture
(JPG) files into the disc slot, the following
media play window will be shown on the
screen:
Explain as follows:
1. Press button to move between
work area A, work area B and work area
C.
2. Press
button to select the desired
folder or file of this work area.
3. Press
button (30) to confirm
the selected item.
4. In viewing picture or playback movie
mode, if you want to return to the
previous menu, press
button.
This disc player offers you an USB port
(26). A USB device can be connected
through this slot.
Using the USB driver:
When you insert an USB device into the
USB port (26), the DVD player will read
the USB automatically.
The unit gives priority to the latter. If
insert a disc into the disc slot (4) while
read the USB device, the unit will play the
Work area A:
Work area B:
Work area C:
(1):
(2):
(3):
Work area D:
folders list
files list
playback audio mode (default)
viewing picture mode
playback movie mode
file information display
ENTER
(STOP)
Data Disc Play Operation
Operation of USB device
disc. Press (21) button to enter into
PRE-STOP mode, then press
button to switch to the reading USB
mode.
Note:
When reading the USB device, please
don't touch or take out the device.
If following the instruction above, the unit
can't still read the device, please check if
the device is in good condition, or take
out the device then insert it into the USB
port (26) once more.
The main unit can only support the
standard USB-memory disc which is
approved by Microsoft.
USB MP3 player is not a standard
which means different brand name or
different models have their own standard.
So our product may not support every
MP3 player.
When connecting an MP3 player and
there has normal battery in the player
(non rechargeable battery), you should
remove the battery from the MP3 player
then connect it to the USB port.
Otherwise, it may cause battery burst.
When in USB play mode, be sure not to
remove the USB device from the USB
port.
GOTO
?
?
?
?
This disc player offers you a memory card
slot (41).
Using the SD/MMC card:
When you insert a SD/MMC card into the
memory card slot (41), the DVD player
will read the
card automatically.
The unit gives first priority to the latter. If
insert a disc into the disc slot (4) while
read the SD/MMC card, the unit will play
the disc. Press
(21) button to enter into
PRE-STOP mode, then press
button to switch to the reading card
mode.
Note:
When reading the memory card, please
don't touch or take out the card.
If following the instruction above, the unit
can't still read the card, please check if
SD/MMC
GOTO
Operation of Memory Card
15