PYLE Audio PLD175TBT User Manual
Page 12
- Error symbol on the display.
Note:
If press
button(1), the unit can't
work yet, please use a cotton swab
soaked in isopropyl alcohol to clean the
disc socket.
RESET
Selecting The Frequency Band
Press
button (14) shortly to select
the desired band. The reception band will
change between FM and AM.
Stereo/Mono
Press
(15) or
on the remote
control to select mono/stereo mode.
Local/Distant
Press
(15) for several seconds
or
to select
between local and distant stations.
LOCAL setting for reception of strong
signal station, and DISTANT setting for
reception of weaker signal stations.
Selecting Station
- Press
for several seconds until
MANUAL appears on the display, and
then press
button to select a station.
If both buttons have not been pressed for
several seconds, they will return to
automatic seek mode .
Automatic Memory Storing & Program
Scanning
- Automatic memory storing
Press
button (17) for several
seconds, the radio searches from the
current frequency and checks the signal
strength until one cycle search is
finished. And then 6 strongest stations
are stored into the corresponding preset
number button.
- Program scanning
Press
button (17) shortly to scan
preset station. When the field strength
level is more than the threshold level of
BAND
ST
MO/ST
ST LOC
LO/DX
AS/PS
AS/PS
on the remote control
- Press preset
button (16) to select a
station which had been stored in the
memory.
1-6
“
”
Radio Operation
stop level, the radio is holding at that
preset number for several seconds with
release mute, and then searches again.
Station Storing
- Press
button to activate automatic
seek mode.
- In manual mode, press
button to
select a station
Press preset
button (16) for several
seconds to store current station into the
number button.
.
1-6
CD/MP3 Operation
Playback
Gently insert a disc with the label side
facing up; the disc will be pulled into the
unit automatically. The disc playback
begins.
For CD:
1.
2.
3. For MP3
1).
3).
Press
button to move between
work area A, B and C.
Press
button to select the
desired folder or file of this work area.
2).
Press
button (30) to confirm
the selected item.
ENTER
9