Pioneer DVD Player DVD-V7200 - Manual (Page 2)

DVD-V7200 – U
PLOAD
/D
OWNLOAD
P
ROGRAM
Page 2 of 3
Pioneer New Media Technologies, Inc., Engineering Support (310) 952-2111
Procedure
A feature of the Upload/Download program is the ability to auto-sense the player’s baud rate and make any
necessary adjustments. Once all equipment is turned ON, launching the software triggers the auto-sensing
functions. Changes to the baud rate require that the program be shut down and re-started before proceeding.
The first time you run the program on a particular computer, the application requires 20 or 40 seconds to launch
(dependant upon the baud rate). The system displays a dialog box stating “Please Wait While Initializing...". This
launch delay happens each time the application is installed on a new computer or the program detects a DVD-
V7200 with different firmware. A check between the file version and the player version causes this delay.
Note: It is unnecessary to re-launch the program when creating multiple files.
Memory to File:
If the Upload/Download program is already running, send all commands to the player before attempting to create a
file from the player’s non-volatile memory and skip to step 5..
1. Click on the Upload/Download program icon to launch the software
(baud rate adjusts automatically)
2. Click on Ports from the main menu bar
3. Select the appropriate Com port if running the program on a PC or select between Printer port and Modem
port for a Macintosh system
4. Confirm that the player commands are set as required
(use the remote control or the front panel to check settings)
5. Click on the Memory to File button to save or download the commands to a file
(automatically selects and opens the directory where the file should be stored)
6. Type an appropriate name for the file
(the file extension is pre-programmed for you)
7. Click on the Save button
File to Memory:
Verify that all equipment is powered ON prior to starting program. Skip to step 4 if the program is already running.
1. Click on the Upload/Download program icon to launch the software
(baud rate adjusts automatically)
2. Click on Ports from the main menu bar
3. Select the appropriate Com port if running the program on a PC or select between Printer port and Modem
port for a Macintosh system
4. Click on the File to Memory button
(automatically selects and opens the directory where files are stored)
5. Click on the appropriate file
6. Click on the Open button to begin the transfer or upload the file to the player’s non-volatile memory