Pioneer DVD Player DVD-V7200 - Manual (Page 3)

DVD-V7200 – U
PLOAD
/D
OWNLOAD
P
ROGRAM
Page 3 of 3
Pioneer New Media Technologies, Inc., Engineering Support (310) 952-2111
Weekly Timer to File:
If the Upload/Download program is already running, send all commands to the player before attempting to create a
file from the player’s non-volatile memory and skip to step 6..
1. Verify that the player’s Weekly Timer is set to ON
2. Click on the Upload/Download program icon to launch the software
(baud rate adjusts automatically)
3. Click on Ports from the main menu bar
4. Select the appropriate Com port if running the program on a PC or select between Printer port and Modem
port for a Macintosh system
5. Confirm that the player commands are set as required
(use the remote control or the front panel to check settings)
6. Click on the Weekly Timer to File button to save or download the commands to a file
(automatically selects and opens the directory where the file should be stored)
7. Type an appropriate name for the file
(the file extension is pre-programmed for you)
8. Click on the Save button
File to Weekly Timer:
Verify that all equipment is powered ON prior to starting program. If the program is already running, skip to step 5.
1. Verify that the player’s Weekly Timer is set to ON
2. Click on the Upload/Download program icon to launch the software
(baud rate adjusts automatically)
3. Click on Ports from the main menu bar
4. Select the appropriate Com port if running the program on a PC or select between Printer port and Modem
port for a Macintosh system
5. Click on the File to Weekly Timer button
(automatically selects and opens the directory where files are stored)
6. Click on the appropriate file
7. Click on the Open button to begin the transfer or upload the file to the player’s non-volatile memory
For additional information, contact Pioneer New Media Technologies at 310/952-2111.