Planet Technology DVR4-ALERT SW242-ALR - Manual (Page 31)

PLANET VIP-110/VIP-210 Web Configuration Guide
- 28 -
inactive for longer than the Maximum Idle Time, then it will be dropped.
Default: null
IPCP Fixed IP Certain ISP provides a fixed IP address to each of its subscriber. This parameter
allows users to setup the fixed IP address assigned by ISP for the PPPoE connec-
tion.
Default: 0.0.0.0
Authentication VIP-110/VIP-210 implements two types of authentication protocol. This parameter
is
protocol used for specifying which authentication protocol VIP will use to send authentica-
tion message to the server.
Default: pap
Transmission VIP-110/VIP-210 implements a bandwidth regulation algorithm over its PPPoE
interface.
bandwidth This algorithm is enabled, when PPPoE client is enabled, for guaranteeing enough
bandwidth is reserved for voice packets
Default: 0
Enable PPTP
Enable or disable built-in PPTP client
Default: disabled.
PPTP Server
If ISP demands for PPTP connection, please insert PPTP server IP address here.
Address
Please consult your ISP personnel to obtain proper PPPoE
related information, and input carefully.
If Internet connection cannot be established, please
double-check the parameters configured in VIP-110/VIP-210
or contact the ISP service staff for support information.
i
Hint