Planet Technology DVR4-ALERT SW242-ALR - Manual (Page 44)

PLANET VIP-110/VIP-210 Web Configuration Guide
- 41 -
ii. H.323 Gatekeeper Configuration
Parameter Description
Gatekeeper
Enable or disable H.323 Gatekeeper function in VIP-110/VIP-210
Operation
Default: Gatekeeper mode in VIP-110/VIP-210 is disabled
Gate Keeper Specify the gatekeeper address when configured to manual mode. When auto mode
Address
is desired, this field should be set to auto.
Allow Calls This field is to inform the H.323 stack to allow calls when the
Without Gate endpoint is not registered with a gatekeeper.
Keeper
Default: true
Registration Type This field is to set the endpoint registration type. This specifies how the endpoint
will register itself with the gatekeeper.
Default: gateway
Max Registration This field is to control how many registration attempts will be made before the
Retries endpoint considers itself to have failed registration.
Default: 2
Time-to-Live When the VIP-110/VIP-210 registers to a gatekeeper, it specifies the duration of the
validity of the registration in the timeToLive field in the RRQ message it sends to
the gatekeeper. The gatekeeper may optionally change the timeToLive by returning
a different value in the RCF message it returns to VIP-110/VIP-210 This command