Planet Technology DVR4-ALERT SW242-ALR User Manual
Page 51
PLANET VIP-110/VIP-210 Web Configuration Guide
- 48 -
ITG>atpm req
ITG>atpm dadd 10 h323 172.16.0.2
ITG>atpm hadd 10 2 10
ITG>atpm aadd 02 0 5 10 2
ITG>atpm done
ITG>atpm store
Dialplan setting on VIP B:
ITG>atpm req
ITG>atpm dadd 10 h323 172.16.0.1
ITG>atpm hadd 10 2 10
ITG>atpm aadd 01 0 5 10 2
ITG>atpm done
ITG>atpm store
The dial plan of the two ITGs adds a new record after those commands.
VIP A:
No.
Hunt Group Dest. ID
Dest.
02
10
10
172.16.0.2
VIP B:
No.
Hunt Group Dest. ID
Dest.
01
10
10
172.16.0.1
Now, once VIP A get a dialed number “02” it will direct to VIP B. The same to VIP B, ‘01’ will map
to VIP A without doubt.
Assume both VIPs have an analog telephone set connected to FXS port #0
To establish the voice communication between these units; .
VIP A:
VIP A
201
VIP B
201
VIP-210
VIP-110