Pioneer DV-566K-s - Manual (Page 54)

Initial Settings menu 09
54
En
• If you connect a TV that is not compatible
with a progressive scan signal and switch
the player to progressive, you will not be
able to see any picture at all. In this case,
switch everything off. Switch the player to
standby then, using the front panel
controls, press
STANDBY/ON while
pressing to switch the player
back to Interlace .
• Taiwanese model and when TV system is
set to
AUTO or NTSC only: When set to
Progressive , PAL and NTSC discs are
both output as progressive NTSC video.
See
page 71 .
• When TV System is set to PAL only:
Progressive cannot be selected. See
page 71 .
Compatibility of this unit with
progressive-scan TVs.
This player is compatible with progressive
video Macro Vision System Copy Guard.
CONSUMERS SHOULD NOTE THAT NOT ALL HIGH
DEFINITION TELEVISION SETS ARE FULLY COMPAT-
IBLE WITH THIS PRODUCT AND MAY CAUSE ARTI-
FACTS TO BE DISPLAYED IN THE PICTURE. IN CASE
OF 525 PROGRESSIVE SCAN PICTURE PROBLEMS, IT
IS RECOMMENDED THAT THE USER SWITCH THE
CONNECTION TO THE “STANDARD DEFINITION”
OUTPUT. IF THERE ARE QUESTIONS REGARDING
OUR TV SET COMPATIBILITY WITH THIS MODEL
525p DVD PLAYER, PLEASE CONTACT OUR
CUSTOMER SERVICE CENTER.
• This player is compatible with the
following Pioneer displays and monitors:
PDP-503HDG, PDP-433HDG progressive
scan-compatible TVs.
S-Video Out
You only need to make this setting if you
connected this player to your TV using an S-
video cable.
• Default setting: S2
If you find that the picture is stretched or
distorted on the default
S2 setting, try
changing it to S1 .
STANDBY/ON
FL DIMMER ECHO VOLUME MIC 2 MIC 1
MIN-MAX MIN-MAX
STANDBY/ON
Digital Audio Out
Video Output
Language
Display
Options
TV Screen
Component Out
S-Video Out
S1
S2
Initial Settings
DV566.book 54 ページ ２００３年６月１７日 火曜日 午後８時１８分