Pioneer DV-566K-s - Manual (Page 74)

Additional information 10
74
En
• Static electricity or other external
influences may cause malfunctioning of
this unit. In this case, unplug the power
cord and then plug back in. This will
usually reset the unit for proper operation.
If this does not correct the problem,
please consult your nearest Pioneer
service center.
Cannot output 96kHz
digital audio. • Check that 96kHz PCM Out is set to 96kHz ( page 52 ).
• Some discs are digital copy protected and do not output high
sampling rate digital audio. In this case the output is automatically
downsampled.
No DTS audio output. • If this unit is connected to a non-DTS compatible amplifier or
decoder using analog audio cable, set
DTS Out to Off ( page 52 ). If
you do not do this, noise will be output when you play a DTS disc.
• If this unit is connected to a DTS-compatible amplifier or decoder
using a digital audio cable, check the amplifier settings, and that the
cable is properly connected.
Disc containing the MP3
tracks won’t play. • This player is compatible with multi-session discs, but only plays
sessions that are closed.
• If the message
Can’t play this format is displayed ( NO PLAY in the
front panel display) when you try to play a disc/track, check the audio
file formats. For more information see
page 8 .
The audio recorded on a
Super VCD disc is not
output properly. •If the audio is switched to [2] when playing a Super VCD that
contains only one stereo soundtrack, there may be no sound at all.
Press
AUDIO to change the soundtrack.
Can’t hear effect of
TruSurround • TruSurround does not work with 96kHz linear PCM DVD.
• The TruSurround effect is only output through the
AUDIO OUT
analog audio outputs.
• The effectiveness of TruSurround varies with the disc.
Problem Remedy
DV566.book 74 ページ ２００３年６月１７日 火曜日 午後８時１８分