Panasonic KX-TG5871AL - Manual (Page 43)

Programmable Settings
43
Guide to handset programming
For your reference, a chart of all programmable functions is printed below. Details for each
item can be found on the corresponding pages. To programme, press {MENU} (centre of
joystick), push the joystick up, down, left, or right to scroll through the menu, and press
{
SELECT} when the desired menu item or setting is displayed.
Important:
L
Before programming, make sure the handset and base unit are not being used. The
handset must be operated near the base unit and while off the base unit or charger.
L You can also programme features using “direct commands”—special codes that take
you directly to the feature you wish to programme and allow you to select the desired
setting (page 46).
During programming:
L
To exit programming, press {OFF} at any time.
L
To go to next page, press {NEXT}.
L
To go back to the top of the menu, press {TOP}.
L To go back to the previous menu, press {BACK}, or push the joystick left.
Monochrome display models: KX-TG5871AL and KX-TGA580AL only
Main menu Sub-menu 1 Sub-menu 2 Page
Answering device
J Message playback – 63
Message alert – 69
Ring count
*1 – 68
Recording time
*1 – 68
Remote code
*1 – 67
Call screening
*1
– 69
Ringer setting
K Ringer volume – 49
Ringer tone – 49
Customize ring – 50
Ring color – 51
Phonebook
P – – 28
Function
M Voice enhancer – 52
Dial lock
*1 – 52
TG5871AL.book Page 43 Friday, June 17, 2005 7:01 PM