Panasonic KX-FLB851 - Manual (Page 55)

7. Multi-Function Station software
53
1 Set the original.
Using the auto document feeder
Insert the document (up to 50 pages) FACE
UP into the feeder until a single beep is
heard.
L Confirm that there are no documents on
the scanner glass.
Using the scanner glass
Place the document FACE DOWN on the
scanner glass, matching the top edge of the
document to the l mark on the unit.
L Confirm that there are no documents in
the auto document feeder.
2 Start an application that supports TWAIN
scanning.
3 Select [Select Device...] from the [File]
menu, then select the [Panasonic KX-
FLB851] (default name) in the dialog box.
4 Select [Acquire Image...] from the [File]
menu.
L The [Panasonic KX-FLB851] (default
name) dialog box will appear.
5 If necessary, change the scanning settings
on your computer.
L If you select [B/W Graphic] for scan
type, the resolution range will be from 150
to 600 dpi.
6 Click [Scan].
L The scanned image will be displayed in
the application window after scanning.
L To cancel scanning while the document is
being scanned, click [Cancel].
Note:
L Depending on the application used, the
appearance may differ slightly.
Remote Control
7.6 Operating the unit from
your computer
You can easily operate the following functions
from your computer.
–
Storing, editing or erasing items in directories
(page 29, 32)
– Programming the features (page 61 to page
68)
– Viewing items in the journal report (page 27)
– Storing the journal report as the computer file
– Viewing items in the Caller ID list (page 38)
– Storing caller information into directories
(page 39)
– Storing the Caller ID list as the computer file
1 Start Multi-Function Station.
2 Select [Remote Control].
L The [Multi-Function Remote Control]
window will appear.
3 Select the desired tab.
L The latest data in the unit will be
displayed.
4 Perform the desired operation.
L For details about each function, click
[
Help].
L To stop the operation, click [Cancel].
5 Click [OK].
L The new data will be transferred to the
unit and the window will close.
L You can also click [Apply] to continue
the next operation without closing the
window.
Note:
L Some of the features cannot be programmed
from your computer.
L For details, see the help file by selecting
[
Usage Tips] from Multi-Function Station.
FLB851-PFQX2175YA-en.book Page 53 Thursday, September 8, 2005 2:24 PM