Panasonic KX-FLB851 - Manual (Page 64)

8. Programmable Features
62
{ 0} “ OFF” (default): The unit will not print the
Caller ID list, but will keep records of the
information for the last 30 callers.
{
1} “ ON”: The unit will print the Caller ID list
automatically after every 30 new calls (page 38).
{#}{ 3}{2}{2} Enabling remote operation for
a telephone answering machine
REMOTE TAM ACT.
MODE=OFF [V^]
If you are using the unit with an answering
machine, activate this feature, and program the
remote activation ID to retrieve recorded voice
messages.
Important:
L The remote activation ID must be the
same as the code that you programmed
on the answering machine for remote
operation. Also, it must be different from
the fax activation code (feature #434 on
page 64).
{ 0} “ OFF” (default)
{ 1} “ ON”
1. Press {MENU}.
2. Press {#}, then {3}{2}{2}.
3. Press {1} to select “ ON”.
4. Press {SET}.
5. Enter your ID from 1 to 5 digits, using 0–9,
{*} and {#}.
L The default ID is “ 11”.
6. Press {SET}.
7. Press {MENU}.
{#}{ 3}{8}{0} Setting the recording paper
size in the paper input tray
PAPER SIZE #1
=LETTER [V^]
{ 1} “ LETTER” (default): Letter size paper
{ 2} “ A4”: A4 size paper
Note:
L If you change the paper size by using
{
PAPER TRAY} in the copy mode (page 44),
the paper size set by this feature will be
changed.
{#}{ 3}{8}{1} Setting the recording paper
size in the multi-purpose input tray
PAPER SIZE #2
=LETTER [V^]
{ 1} “ LETTER” (default): Letter size paper
{ 2} “ A4”: A4 size paper
{ 3} “ LEGAL”: Legal size paper
Note:
L If you change the paper size by using
{
PAPER TRAY} in the copy mode (page 44),
the paper size set by this feature will be
changed.
{#}{ 3}{8}{2} Setting the recording paper
size in the optional input tray
L This feature will be displayed only when the
optional input tray is installed.
PAPER SIZE #3
=LETTER [V^]
{ 1} “ LETTER” (default): Letter size paper
{ 2} “ A4”: A4 size paper
{ 3} “ LEGAL”: Legal size paper
Note:
L If you change the paper size by using
{
PAPER TRAY} in the copy mode (page 44),
the paper size set by this feature will be
changed.
{#}{ 4}{0}{3} Setting power save feature
POWER SAVE
=15min [V^]
To set the length of time before the unit enters
the power save mode.
{
1} “ 5min”: 5 minutes
{ 2} “ 15min” (default): 15 minutes
{ 3} “ 30min”: 30 minutes
{ 4} “ 1h”: 1 hour
Note:
L During the power save mode, the scanner
lamp remains OFF.
{#}{ 4}{6}{3} Setting the default operation
mode
DEFAULT MODE
=COPY [V^]
To select the default operation mode when the
selected time of the mode timer (feature #464)
passes.
{
1} “ COPY” (default): Copy mode is selected as
default.
{
2} “ FAX”: Fax mode is selected as default.
Note:
L You cannot select the scan mode using this
feature.
{#}{ 4}{6}{4} Setting the default operation
mode timer
MODE TIMER
=1min [V^]
FLB851-PFQX2175YA-en.book Page 62 Thursday, September 8, 2005 2:24 PM