Et-md77dv – Panasonic ET-MD77NT User Manual

Page 2

Advertising
background image

2

ET-MD77DV

DVI-D Board for DLP™ Projector

S P E C F I L E

As of December 2006

Specifications

Power supply:

Provided from the DLP™ projector

Power consumption:

Projector power consumption increases approximately 5 W

Terminals:

DVI-D input:

DVI-D 24-pin x 1, DVI 1.0 compliant, compatible with HDCP
EDID1:

480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i,
1080/25p, 1080/24p, 1080/24sF, 1080/30p

EDID2:

VGA (640 x 480) – U-XGA (1,600 x 1,200),
dot clock: 25 –162 MHz

LAN:

RJ-45 x 1, 10Base-T/100Base-TX for network connection

Dimensions (W x H x D):

204 x 32 x 214 mm (8-1/32˝ x 1-1/4˝ x 8-7/16˝)

Weight:

310 g (10.9 lbs.)

Operating temperature:

0°C – 40°C

Operating humidity:

10% – 80% (no condensation)

NOTE:

Ready for single link only. Ready for the non-interlaced signals only with EDID2.
576p and 720/50p signals can be input only when this unit is used with the PT-DW10000,
PT-D10000, PT-DW7000 or PT-D7700.

Weights and dimensions shown are approximate.

Specifications subject to change without notice.

DLP and DLP logo are trademarks of Texas Instruments.

This input board is designed for use with the DLP™ projectors. It enables the input of a digital signal (DVI-D) from
a computer. Remote control of the projector is also possible from an external computer connected via LAN.

NOTE: Please use the module only on the specified Panasonic DLP™ projector.

Dimensions

DVI-D output connector pin
assignment

unit: mm

(Dimensions given in inches are approximate.)

204

(8-1/32˝)

214

32

(8-7/16˝)

(1-1/4˝)

Note: This illustration is not drawn to scale.

no.

signal

1

T, M, D, S data 2-

2

T, M, D, S data 2+

3

T, M, D, S data 2/4 shield

4

T, M, D, S data 4-

5

T, M, D, S data 4+

6

DDC clock

7

DDC clock

8

NC

9

T, M, D, S data 1-

10

T, M, D, S data 1+

11

T, M, D, S data 1/3 shield

12

T, M, D, S data 3-

13

T, M, D, S data 3+

14

+5 V

15

GND

16

Hot plug detection

17

T, M, D, S data 0-

18

T, M, D, S data 0+

19

T, M, D, S data 0/5 shield

20

T, M, D, S data 5-

21

T, M, D, S data 5+

22

T, M, D, S clock shield

23

T, M, D, S clock +

24

T, M, D, S clock -

Advertising