Wcaution, Probe mode – Proctor-Silex 840149500 User Manual

Page 6

Advertising
background image

6

Probe Mode

1. Insert probe through the grommet on

glass lid and into
meat. Make sure
probe is com-
pletely inserted
into the meat. It
should not touch
bone, fat or
gristle.

2. Plug the probe into the probe jack on

the side of the slow cooker base.

3. Press to turn slow cooker on.

4. Press and will illuminate.

5. Select a desired heat setting by

pressing the up or down arrow
buttons to scroll between LOW and
HIGH settings.

6. Press when desired heat

setting is selected. will illuminate.

7. Select desired temperature of food

by pressing up or down arrow but-
tons (5 degree increments). Refer to
temperature guide on glass lid for
food safety guidelines or to the cook-
ing guide on page 7 for suggested
food temperatures.
NOTE: To change temperature dis-
play from Fahrenheit to Celsius,
press

and

at the

same time. The temperature in
Celsius will now be displayed. If
the slow cooker is unplugged, it will
reset to Fahrenheit.

8. Press when the desired

temperature is selected to begin
cooking. Slow cooker will turn on
automatically if

is not

pushed within 20 seconds.
NOTE: Display will flash until

is pressed.

The display will show COOK and a
3 second beep will sound. While
cooking, the display will alternate
between the desired cooking tem-
perature and the actual cooking
temperature.

NOTE: The display will indicate PLUG
PRBE
if the probe is not plugged in. If
the probe is not plugged in, the slow
cooker will cook at the heat setting
previously selected. It will shut off
after 14 hours of operation.

9. When the internal temperature of the

food reaches the desired tempera-
ture, the slow cooker will beep 3
times then automatically switch to
the Keep Warm setting and and the
display will show WARM.

NOTES:

• 14 hours is the maximum amount of

operating time. After a total of 14
hours, the slow cooker will shut off
automatically and the display will shut
OFF.

• Modes may be changed during

cooking, however slow cooker must
be restarted to change the desired
internal temperature.

PROBE

Heat

Setting

ENTER

Desired

Temp

ENTER

w

CAUTION

Spoiled Food Hazard

• Use only the probe provided with the product.
• Use of a different probe may damage the unit resulting in undercooked food.

ENTER

ENTER

PROBE

ENTER

840149500 Ev05 6/8/06 1:26 PM Page 6

Advertising