How to remove the pan and tilt cover – Pelco ESPRIT ES3012 User Manual
Page 12
Advertising
12
Pelco Manual C306M-K (4/05)
TXB SERIES TRANSLATOR BOARD INSTALLATION
(OPTIONAL)
Pelco’s TXB Series allows controllers from other companies to communicate with the Esprit
system.
To install a TXB Series board, remove the left cover of the pan and tilt. Once the cover is
removed, refer to the manual supplied with the translator board to complete the installation.
HOW TO REMOVE THE PAN AND TILT COVER
1.
Unscrew the Phillips head screw located on the left cover of the pan and tilt.
2.
Remove cover and place to the side.
Advertising