Pelco ESPRIT ES3012 - Manual (Page 8)

8 Pelco Manual C306M-K (4/05)
A
B
3
Attach the camera and lens to the
mount. Extend the lens to the maximum
length before positioning the camera
and lens.
A. Position the camera and lens so
the lens does not extend beyond
the end of the mount.
B. Fasten the camera and lens to the
mount with the 1/4-20 Phillips
screws, lock washers, and flat
washers (supplied).
4
Plug the lens control and camera power connectors into the P3 and P6 receptacles on
the PC board. Connect the video coax BNC to the camera.
5
Install the camera mount in the enclosure. Insert the pin, on the front of the mount, into
the holder on the top of the window bracket. Adjust the camera focus and iris, if neces-
sary. Close and latch the enclosure lid.
PIN
PIN
HOLDER