Inserting the battery – Panasonic DMC-F1PP User Manual

Page 12

Advertising
background image

Preparation

12

Inserting the Battery

[Preparation]
• Check that the power switch is set to [OFF]

and the lens is stored.

[Inserting the battery]

1

Slide the door to the direction of the
arrow to open the Memory Card/battery
door.

2

Insert the charged battery all the way
in, until it is locked

1

.

3

Close the Memory Card/battery door.

[Removing the battery]

4

Slide the door in the direction of the
arrow to open the Memory Card/battery
door.

5

Slide the lock

1

in the direction of

the arrow to remove the battery.

6

Close the Memory Card/battery door.

• If you will not be using the camera for a long

time, remove the battery.

• When the fully charged battery is inserted in the

camera for more than 1 hour, the clock setting is
memorized by the camera for about 24 hours
even after the battery is removed. (The time may
be shorter if the battery is not charged
sufficiently)
When the clock setting is cancelled, please set
the date/time again. (P24)

• When the card is being accessed, do not remove

the battery.

• The battery supplied with this camera is

exclusively designed for this camera. Do not use
with any other equipment.

• When removing the battery, be careful not to

drop it.

CAUTION

Danger of explosion if battery is incorrectly
replaced. Replace only with the same or
equivalent type recommended by the
manufacturer. Dispose of used batteries
according to the manufacturer’s
instructions.

3,6

2

5

1,4

Advertising