Panasonic DMC-F1PP - Manual (Page 17)

Preparation
17
Turning Power on/off
1 Set the power switch to [ON].
• The Status indicator 1 lights.
2 Set the power switch to [OFF].
• When the power switch is turned on, do not hold the lens cover. If the lens cover does not
open, [SYSTEM ERROR] is displayed. Turn the power switch off and on.
• When turning the power switch off, do not hold the lens cover. If the lens cover does not
close, the power turns off with it opened. Turn the power switch on and off.
• When turning on the power in the recording mode, do not put any obstacle in front of the
lens.
ª Status Indicator A
Lighting:
• When turning the power switch to [ON].
Blinking:
• While the focus is being adjusted or the
focus is not properly adjusted.
• When the card is not inserted.
• When no space is left on the card.
• When the remaining battery power is low.
(blink slowly)
ª Flash/Access Indicator B
Lighting:
• When accessing the card.
• When the flash fires. (It lights when the
shutter is pressed halfway)
• When sending data to PC.
Blinking:
• When charging the flash.
• When setting the flash mode to forced off
and recording in dark places (blink slowly.)
OFF ON
1,2