Setting up the power save mode – Panasonic DMC-F1PP User Manual
Page 73
Technical use
73
Setting up the Power Save Mode
In this mode, if the camera is not operated for
a certain amount of time, it is automatically
turned off.
1
Press the [MENU] button.
2
Press
1
to
open the setup menu.
3
Press
3
/
4
to
select [POWER SAVE].
4
Press
2
/
1
to choose the setting time.
• [2 MIN.]
• [5 MIN.]
• [10 MIN.]
• [OFF]: The power is not turned off
automatically.
5
Press the [MENU] button.
• The menu will disappear.
• If you want to cancel the power save mode, turn the power switch to [ON] again after
turning it to [OFF], or press the shutter button.
• When using the AC adaptor/connecting to a PC/recording the motion image/playing back
the motion image/during slide show, the power save mode is not available.
• In simple mode [
], the power save is fixed to [2 MIN.].
• In recording mode, when keeping the [DISPLAY] button pressed for 2 seconds, power save
mode starts.
1,5 2,3,4
SETUP 1/2
SELECT
SET
EXIT
MENU
REC
MONITOR
POWER SAVE
2 MIN.
5 MIN.
10 MIN.
AUTO REVIEW
BEEP
1
3,4