Profoto Pro-B2 User Manual

Page 11

Advertising
background image

Profoto – Assesoires

Pro -B2

The Light Shaping Company

21

Profoto

Brief Instructions

See page 18 for top panel picture.

.

Connect the desired number of lamp heads to sockets A & B.

.

Start charging by pushing the button ON [12]. The ready lamp [8] will light up when

the generator is fully charged.

.

The generator can be activated from OFF position by means of a sync signal

from a camera.

.

Choose the desired energy distribution with the control POWER [15,16 ] and the

SYM/ASYM switch [2]. The generator will automatically dump if the energy level

is lowered.

.

Connect sync cord and/or flash meter to the sync sockets SYNC [6]

.

Activate the photocell [5] by pushing the button SLAVE [7].

.

Activate the audible signal by pushing the button SOUND [9].

.

Pushing the button MOD.LIGHT [11] turns on the modelling light, which will stay on for

10 seconds. To have the modelling light stay on for a longer period of time push the

button two or three consecutive times, which will give 30 and 60 seconds respectively.

.

Choose fast recharging by pushing down the button FAST [10].

.

The charge indicator [3] shows the battery charge level.

.

Turn off the generator by pushing and holding down the button ON [12]. The generator

automatically turns off after 30 minutes when not in use.

.

If using the optional built-in 32 channel radio receiver use the Radio channel control (14)

to set the channel.

The Light Shaping Company

20

Profoto

Pro -B2

Profoto – Brief Instructions

Battery and battery charging

The battery can be charged through the mains outlet by using a special charger or charged

directly from the car cigarette lighter when driving. The charging time is only 2.5 or 5 hours

depending on the charger used. The generator can be used during charging. The generator

cannot be used without a battery in place. The battery will not deteriorate from being

charged frequently or from being charged when not fully discharged. Neither does it need

to be fully charged before using it. The actual battery life is in fact elongated when fully

recharged. The battery indicator shows the charge level and is up-dated when the generator

is turned on or when firing a flash. The battery can be charged when dismantled.

The environment influences the capacity of both the generator and the battery, for example

extreme cold decreases the battery charging capacity.

Profoto Pro-B2 – Assesoires

10.02.18

Multivoltage Charger incl. adapters, 90-130V/190-250V, 50-60Hz,

2.0A, 5 hour charging (incl. with the Pro-B2)

10.02.19

Charger (12/24V) for Car Cigarette Lighter, 3.5A, 2.5 hour charging

10.02.21 Battery

only

90.07.26

Battery incl. Cassette

90.07.65

Universal power adapter for 2.5 hour charging, The adapter accepts a wide

range of input voltages: 12-24V or 90-240V.

34.02.02

Pro-B protective bag

Advertising