POSIFLEX Business Machines AURA 6800 - Manual (Page 15)

Page 15
Thermal head configuration 512 dots / line(Maximum 576 dots/line)
Printing speed 150 mm / sec. max.
Paper feed method Friction auto-feed
Paper load method Drop and use
Auto-cutter capability Partial cut (1 point at center left)
Manual cutter Saw tooth blade
Dot Pitch 0.125 x 0.125 mm
Input power type DC
Input voltage 24 V + / - 5 %
Dimension (mm) 150 (W) x 187 (D) x 140 (H)
Weight 0.95 Kg net
PAPER
PAPER TYPE THERMAL ROLL PAPER
Paper roll formation External side is heat-sensitive side
Paper width 80 (or 58) + 0 / - 1 mm
Paper roll outer diameter 80 mm max.
Paper roll inner diameter 12 + 1 / - 0 mm
Paper thickness 60 ~ 80 um
POWER ADAPTOR
ITEM REQUIREMENT
Input voltage
100 V AC ~ 240 V AC
Input frequency 50 ~ 60 HZ
Input current 1.8 A MAX. @ 115 V AC
Output voltage + 24 V DC
Output power 50 W
Output regulation + / - 5 %
MTBF 30,000 HRS
EMI standards VDE – A, FCC – A, VCCI – A
FURTHER TECHNICAL INFORMATION
PRINTER SETUP
There are two difference way to setup Aura-6800. Firstly, one is the DIP
Switch in the bottom of printer for setup the function such as baud rate, paper
width and others. Another switch is setup trough software to adjust such as