Inserting / removing the battery, Inserting/removing the battery – Panasonic DMC-FX7PP User Manual

Page 14

Advertising
background image

Preparation

14

Inserting/Removing the Battery

• Check that the camera is turned off and

that the lens is retracted.

1 Slide the card/battery door to

open it.

• Please be sure to use genuine

Panasonic batteries (CGA-S004A).

2 Insert:

Insert the charged battery until it
clicks paying attention to the
direction of the battery.

Remove:
Slide the lock

1 to remove the

battery.

3 1 Close the card/battery door.

2 Slide the card/battery door to

the end and then close it firmly.

• If you will not be using the camera for a

long time, remove the battery. Store the
removed battery in the battery carrying
case (supplied). (P95)

• When fully charged battery has been

inserted for more than 24 hours, the clock
setting is stored (in the camera) for at
least 3 months even if the battery is
removed. (The storing may be shorter if
the battery is not charged sufficiently.)
If more than 3 months has passed, the
clock setting will be lost. In this case, set
the clock again. (P18)

• Do not remove the card and the battery

while the card is being accessed. The
data on the card may be damaged.

• The supplied battery is designed only

for use with this camera. Do not use it
with any other equipment.

FX7PP.book 14 ページ 2004年7月30日 金曜日 午前10時37分

Advertising