Panasonic DMC-FX7PP - Manual (Page 85)

Connecting to a PC or Printer
85
Connecting to a PC
• Refer to the separate operating
instructions for details about PC
connection.
• If you use Windows 98/98SE, install the
USB driver and then connect it to the
computer.
• When using Windows Me/2000/XP, Mac
OS 9.x and Mac OS X, you do not have to
install the USB driver.
A: AC adaptor (DMW-CAC2; optional)
B: USB connection cable (supplied)
1 Turn the camera on and set the
[USB MODE] according to the OS
you use.
• Set to [PC] or [PictBridge (PTP)]. Refer
to “Before Connecting with USB
Connection Cable” on page 83.
• If [USB MODE] is set to [PictBridge
(PTP)] while Windows XP or Mac OS X
is used, it is connected as PTP.
2 Connect the camera to a PC via
the USB connection cable B
(supplied).
• Connect the USB connection cable with
the [ ] mark facing the [ 1] mark on
the [DIGITAL] socket.
• Hold C and then insert or pull the USB
connection cable straight.
Depending on the USB mode setting, the
indications on the screen may vary. Refer
to page P86.
DIGITAL
AV OUT
DC IN
FX7PP.book 85 ページ ２００４年７月３０日 金曜日 午前１０時３７分