Panasonic DMC-FX7PP - Manual (Page 44)

Recording pictures (basic)
44
Taking Pictures using Burst Mode
1 Press the Single/Burst Mode
Button to switch the burst mode
setting and then take pictures.
: High speed
;
: Low speed
;
: No limit
;
No display (canceled)
∫ Number of pictures recorded in burst
mode
¢When the shutter speed is higher than
1/60 and the flash is not activated
• In simple mode [ ], the burst speed is
fixed to Low. (P32)
• Keep pressing the shutter button fully to
activate the burst mode.
• If the flash is activated, you can record
only 1 picture.
• When the self-timer is used, the number
of recordable pictures in burst mode is
fixed to 3.
• When the burst mode is activated, the
audio recording function cannot be used.
• When setting auto bracket and the burst
mode simultaneously, auto bracket will be
performed by default.
• When the burst mode setting is set to no
limit, the speed of taking pictures
becomes slow during a recording in burst
mode.
• Burst mode will not perform as described
if a MultiMediaCard is used in place of an
SD Memory Card. The reading/writing
speed of a MultiMediaCard is slower than
that of an SD Memory Card.
• The setting of auto review function is fixed
to [1SEC.]. (The picture is not enlarged.)
1600
19
Burst speed
(pictures/
second) ¢
Number of recordable
pictures (pictures)
3
max. 4 max. 7
2
2
Depends on
the card
capacity Depends on
the card
capacity
FX7PP.book 44 ページ ２００４年７月３０日 金曜日 午前１０時３７分