Appendix – Pioneer AVIC F500BT User Manual

Page 108

Advertising
background image

No sounds are produced.
The volume level will not rise.

Cables are not connected correctly.

Connect the cables correctly.

The system is performing still, slow
motion, or frame-by-frame playback
with video.

There is no sound during still, slow motion, or
frame-by-frame playback with video.

The system is paused or performing,
fast reverse or forward during the
audio playback.

There is no sound on fast reverse or forward.

The picture stops (pauses) and
the navigation system cannot be
operated.

The reading of data is impossible
during video playback.

After touching g once, start playback once
more.

Cannot be operated.

The iPod is frozen.

! Reconnect the iPod with the USB interface
cable for iPod.

! Update the software version of iPod.

An error has occurred.

! Reconnect the iPod with the USB interface
cable for iPod.

! Park your vehicle in a safe place, and apply
the parking brake. Turn the power off and
then turn the power on. If this does not solve
the problem, press

RESET button on the navi-

gation system.

! Update the software version of iPod.

Songs on iPod connected with
this system cannot be available
as voice commands or different
song or title from the one that
you said is recognized.

iPod content/data has been up-
dated, but the data on this system

’s

memory has not been updated yet.
(i.e., system has not cataloged new
iPod content), or cataloging was not
completed)

If you update the iPod data, activate [

VR Cat-

alog Mode] to catalog/transfer the music in-
formation to this system and synchronize the
music information for voice commands with
the data on iPod. (Page 97)

Problems with the phone screen

Symptom

Cause

Action (See)

Dialing is not possible because
the touch panel keys for dialing
are inactive.

Your phone is out of range for ser-
vice.

Retry after re-entering the range for service.

The connection between the cellular
phone and the navigation system
cannot be established now.

Perform the connection process.

If the screen becomes frozen...

Park your vehicle in a safe place, and apply the
parking brake. Turn the power off and then
turn the power on. If this does not solve the
problem, press

RESET button on the navigation

system.

Appendix

En

108

Appendix

Advertising