Pioneer AVIC F500BT - Manual (Page 17)

What you can do on each menu
1 Top Menu
Press MENU button to display the
“Top
Menu
”.
This is the starting menu to access the desired
screens and operate the various functions.
2 Destination Menu
You can search for your destination on this
menu. You can also check or cancel your set
route from this menu.
3 Contacts screen
You can access the list of contacts to call up
an entry.
4 AV Source menu
You can access the screen for selecting the
audio and visual source to play.
5 Phone Menu
You can access the screen that is related to
hands-free phoning to see call histories and
change the settings on the Bluetooth wireless
technology connection.
6 Settings Menu
You can access the screen to customize set-
tings.
7 Map screen
Press MAP button to display the navigation
map screen.
8 AV operation screen
When you play the AV source, this screen ap-
pears regularly. Touching the icon on the top
left corner displays the
“AV Source” menu.
p To return to the previous screen, touch
.
Displaying the rear camera image
[ RearView] can be displayed the full-screen
rear camera image. [ RearView] is useful if
you want to monitor an attached trailer, etc.
= For details, refer to Setting the rear view
camera on page 92.
1 Press MENU button to display the
“Top
Menu ”, and then touch [Settings].
2 Touch [System Settings] and then touch
[Back Camera].
3 Touch [On] next to
“Camera” to acti-
vate the camera setting.
4 Press MENU button to display the “Top
Menu
” and then touch [AV Source].
5 Touch [RearView] on the
“AV Source”
menu.
Listening to the combined car
stereo sounds
When the navigation system is combined with
ND-G500 (sold separately), you can listen to
the sound output from the connected car
stereo.
1 Select
“Preout” on [Audio Out Selec-
tion].
= For details, refer to Setting the audio output
on page 96.
2 Press MENU button to display the
“Top
Menu
” and then touch [AV Source].
3 Touch [OFF] on the “AV Source” menu.
4 Turn the car stereo on.
5 Adjust the volume level with the com-
bined car stereo.
p When ND-G500 is connected with this sys-
tem, the following cases always mute the
sound output from the connected car
stereo:
— While you use a mobile phone con-
nected with Bluetooth technology (dial-
ling, talking, incoming call).
— While you perform the voice operation.
— When the navigation guidance voice is
output.
Basic operation
En
17
Chapter
02
Basic
operation