Pioneer DEH-P7000BT - Manual (Page 38)

3 Turn MULTI-CONTROL to select the
function.
PH BOOK DOWNLOAD (phone book down-
load)
—PH BOOK TRANSFER (phone book
transfer)
—AUTO CONNECT (automatic con-
nection setting)
—AUTO ANSWER (automatic
answer setting)
—ECHO CANCEL (echo can-
cel)
—RING TONE (ring tone select)—
NUMBER DIAL (call by entering number) —
CLR MEMO (clear memory)
—
PH. B. NAME VIEW (phone book name view)
—MENU (menu language)—DEVICE INFO
(device information)
If not connected yet
The following functions cannot be operated.
! PH BOOK DOWNLOAD (phone book
download)
! ECHO CANCEL (echo cancel)
! NUMBER DIAL (call by entering number)
! CLR MEMO (clear memory)
! PH. B. NAME VIEW (phone book name
view)
If connected but not paired yet
The following functions cannot be operated.
! PH BOOK DOWNLOAD (phone book
download)
! ECHO CANCEL (echo cancel)
! CLR MEMO (clear memory)
! PH. B. NAME VIEW (phone book name
view)
Notes
! You can also select the function by pressing
FUNCTION on the remote control.
! To return to the playback display, press
BAND/ESC.
! DEVICE INFO is the same as that of the Blue-
tooth audio. (Refer to Displaying BD (Bluetooth
Device) address on page 28.)
! If cellular phone is connected to this unit via
Bluetooth wireless technology with HFP
(Hands-Free Profile), PBAP (Phone Book Ac-
cess Profile) and SPP (Serial Port Profile),
PH BOOK DOWNLOAD can be operated.
! If you do not operate functions other than
PH BOOK DOWNLOAD,
PH BOOK TRANSFER, and NUMBER DIAL
within about 30 seconds, the display automati-
cally returns to the ordinary display.
Downloading phone books
from your cellular phone
Phone books in your cellular phone can be
downloaded and stored in this unit.
! Depending on the cellular phone, you can-
not use this function.
! 400 entries for each user (max. 3 users) can
be stored in the phone book. Each indepen-
dent entry can hold three phone numbers
and genres.
1 Display the function menu.
Refer to Introduction to advanced operations
on the previous page.
2 Use MULTI-CONTROL to select
PH BOOK DOWNLOAD.
3 Press MULTI-CONTROL to enter in the
phone book download standby mode.
Phone book downloading starts automatically.
When phone book download is completed,
DATA DOWNLOADED is displayed.
# The display indicates how many entries have
been transferred and the total number to be
transferred.
# If the ID and the password are requested, refer
to Entering the ID and the password on this page.
Entering the ID and the password
If the ID and the password are requested, read
the following instructions to enter the ID and
the password.
! Up to 20 characters can be entered for the
ID and up to 16 characters can be entered
for the password.
1 Press DISP to switch between alphabet
and numbers.
Press
DISP repeatedly to switch between the
following character types:
Alphabet
—Numbers and symbols
2 Push MULTI-CONTROL up or down to
select a letter.
Operating this unit
En
38
Section
02