Pioneer DEH-P7000BT - Manual (Page 50)

3 Push MULTI-CONTROL right to show a
confirmation display.
BT RESET :YES is displayed. Clearing memory
is now on standby.
# If you do not want to reset phone memory,
press
BAND/ESC.
4 Press MULTI-CONTROL to clear the
memory.
Updating the software about
Bluetooth connection
This function is used to update this unit with
the latest software. For about software and up-
dating, refer to our website.
1 Display the initial setting menu.
Refer to Adjusting initial settings on page 46.
2 Use MULTI-CONTROL to select
SOFTWARE UPDATE.
3 Push MULTI-CONTROL up or down to
select a appropriate group.
4 Press MULTI-CONTROL to display the
data transfer mode.
# To finish the updating, follow the on-screen in-
structions.
Initial Settings
En
50
Section
04