Pioneer DVR-433H-K - Manual (Page 24)

Controls and displays 03
24
En
Display
1
Lights during playback; blinks when playback is paused.
2
Lights when copying.
3 ì
Lights during recording; blinks when recording is
paused.
4 (page 41)
Lights when a timer recording has been set.
(Indicator blinks if the timer has been set to DVD but
there isn’t a recordable disc loaded, or the timer has
been set to HDD but the HDD is not recordable.)
NTSC
Lights when playing NTSC format video.
(page 95)
Indicates which channels of a bilingual broadcast
are recorded.
(page 94)
Lights when the component video output is set to
progressive scan.
OVER (page 95)
Lights when the analog audio input level is too high.
5 Recording quality indicators (page 38)
XP
Lights when the recording mode is set to XP (best
quality).
SP
Lights when the recording mode is set to SP
(standard play).
LP / SLP
Lights when the recording mode is set to LP (long
play) or SLP (super long play).
EP / SEP
Lights when the recording mode is set to EP
(extended play) or SEP (super extended play).
MN
Lights when the recording mode is set to MN
(manual recording level) mode.
6 Character display
7 R / RW
Indicates the type of recordable DVD loaded: DVD-R or
DVD-RW.
8 AUTO
Lights when Auto Start Recording has been set, and
during Auto Start Recording.
9 PL (page 73)
Lights when a VR mode disc is loaded and the
recorder is in Play List mode.
2 3 (page 98)
Shows the remote control mode (if nothing is
displayed, the remote control mode is 1).
V
Lights when an unfinalized Video mode disc is
loaded.
P R L
9 7 8
2 4 3 5
6
1
DVR-433H_UK.book 24 ページ ２００５年３月１日 火曜日 午後５時６分