Powermatic WP2510 - Manual (Page 26)

26
4. Select Counting direction
You can select the counting direction according to the table movement.
Step 1: Press
Display
.......................[default]
Step 2: Press to change the direction.
“-dir” numbers decrease as table rises (accords with scale on planer).
“dir-“ numbers increase as table rises.
Step 3: Press to confirm or press to clear.
5. Select Positioning Mode
Step 1: Press
Step 2: Press to select.
a. ---| |--- both directions
b. ---| left
c. |--- right
Step 3: Press to confirm or press to clear.