Pioneer VSX-43TX - Manual (Page 13)

13
EASY SETUP GUIDE
Easy Setup Guide Part2
1 1 1 1 1 QUICK setup
With this QUICK setup you can quickly and easily adjust the speakers settings so that you get enjoyable
surround sound with minimum effort.
You must have front and surround speakers hooked up to use this setup.
You only need to do these settings once (unless you change the placement of your current speaker system or
add new speakers, etc.).
SOURCE
MULTI CONTROL
RECEIVER
MOVIE MUSIC
ENTER
MULTI
OPERATION
SURROUND
MODE
STEREO/
DIRECT
SYSTEM
OFF
ACOUSTIC
EQ
SB CH
MODE
INPUT
MIDNIGHT
CHANNEL
−
CHANNEL
+
DTV ON/OFF BAND
MUTE
MENU TOP MENU TUNER EDIT
GUIDE SYSTEM
SETUP
AUDIO RETURN
MULTI CH
INPUT
ST
TUNE
MASTER
VOLUME
ST
TUNE
DVD/LD
ENTER
VCR 2
TV / SAT
C D
VCR/DVR TV CONT
TUNER RECEIVER
2,8
3-7
1
1 Press the RECEIVER button on
the remote control.
2 Press the SYSTEM SETUP
button.
LOUDNESS MIDNIGHT TONE DNR ATT STEREO
TUNED
RDS
Hi-BIT/
MULTI-ROOM
SAMPLING
EON
RF ATT
MONO Neo :6
DIGITAL
DTS ES EX
MPEG AAC
STEREO
PRO LOGIC
DSP
L C R LFE
AUTO
SB CH ON MOVIE
MUSIC
OFF
L S S R S
AUTO
RF
DIGITAL
dB SIGNAL
SP A B
ANALOG
This display appears on the receiver.
3 SURROUND SETUP should be
selected, if not use the
5∞
buttons to select it. Press the
ENTER button.
4 Use the
5∞ buttons to select
QUICK. Press the ENTER button.
LOUDNESS MIDNIGHT TONE DNR ATT STEREO
TUNED
RDS
Hi-BIT/
MULTI-ROOM
SAMPLING
EON
RF ATT
MONO Neo :6
DIGITAL
DTS ES EX
MPEG AAC
STEREO
PRO LOGIC
DSP
L C R LFE
AUTO
SB CH ON MOVIE
MUSIC
OFF
L S S R S
AUTO
RF
DIGITAL
dB SIGNAL
SP A B
ANALOG
5 Use the
5∞ buttons to navigate
through the QUICK setup menus.
When you get a menu you want
to adjust press ENTER.
LOUDNESS MIDNIGHT TONE DNR ATT STEREO
TUNED
RDS
Hi-BIT/
MULTI-ROOM
SAMPLING
EON
RF ATT
MONO Neo :6
DIGITAL
DTS ES EX
MPEG AAC
STEREO
PRO LOGIC
DSP
L C R LFE
AUTO
SB CH ON MOVIE
MUSIC
OFF
L S S R S
AUTO
RF
DIGITAL
dB SIGNAL
SP A B
ANALOG
When ENTER is pressed, the setting for each
selected menu blinks.
In each mode, the current settings are dis-
played automatically. We suggest you adjust all
these settings when you first hook up the
receiver.
SUBWOOFER setting:
If you connected a subwoofer select YES, if you
didn’t select NO
.
CENTER SP setting:
If you connected a CENTER speaker select YES,
if you didn’t select NO.
SURRBACK SP setting:
If you connected a SURROUND speaker(s) select
YES, if you didn’t select NO.
ROOM SIZE setting:
Tell the receiver your room size so it can equalize
the speakers properly. Use the chart below for an
approximate definition of the settings.
S: 12 feet by 15 feet
M: 18 feet by 20 feet
L: 25 feet by 30 feet
LISTENING POSITION setting:
This setting establishes where your ideal listen-
ing position is. Choose from the three possibili-
ties following the guide below.
FRONT: your listening position is closer to the
front speakers.
CENTER: your listening position is equidistant
from the front and surround speakers.
REAR: your listening position is closer to the
surround speakers.
6 In a menu use the
5∞ buttons to
select the different settings.
When you have the setting you
want in a particular menu, press
ENTER.
LOUDNESS MIDNIGHT TONE DNR ATT STEREO
TUNED
RDS
Hi-BIT/
MULTI-ROOM
SAMPLING
EON
RF ATT
MONO Neo :6
DIGITAL
DTS ES EX
MPEG AAC
STEREO
PRO LOGIC
DSP
L C R LFE
AUTO
SB CH ON MOVIE
MUSIC
OFF
L S S R S
AUTO
RF
DIGITAL
dB SIGNAL
SP A B
ANALOG
7 Repeat steps 5 and 6 to change
other menus.
8 Press the SYSTEM SETUP
button.
The receiver exits the setup process.