Pioneer VSX-43TX - Manual (Page 87)

87
EXPER
T
Fine Tuning Your System
DYNAMIC RANGE CONTROL
This feature makes it possible to enjoy full surround sound effects on Dolby Digital and DTS sources even at low
volumes. It does this by compressing the dynamic range. Dynamic range is the difference between the loudest
and the softest sounds in any given signal. Compressing the range plays sounds so the quieter ones are audible
and the louder ones don’t get distorted or become overpowering. This feature only applies to Dolby Digital and
DTS sources but the MIDNIGHT mode (explained on page 48) accomplishes the same end for a variety of
sources. If continuing from BASS PEAK LEVEL, DYNAMIC RANGE CONTROL should be selected.
Follow steps 1-5 on page 79, if necessary, to get
to the starting point mentioned here.
1 D-RANGE CTRL should be
selected, if it isn’t use the
5∞
buttons to select it. Press ENTER.
LOUDNESS MIDNIGHT TONE DNR ATT STEREO
TUNED
RDS
Hi-BIT/
MULTI-ROOM
SAMPLING
EON
RF ATT
MONO Neo :6
DIGITAL
DTS ES EX
MPEG AAC
STEREO
PRO LOGIC
DSP
L C R LFE
AUTO
SB CH ON MOVIE
MUSIC
OFF
L S S R S
AUTO
RF
DIGITAL
dB SIGNAL
SP A B
ANALOG
2 Use the
5∞ buttons to choose
either OFF, MID or MAX. Press
ENTER.
LOUDNESS MIDNIGHT TONE DNR ATT STEREO
TUNED
RDS
Hi-BIT/
MULTI-ROOM
SAMPLING
EON
RF ATT
MONO Neo :6
DIGITAL
DTS ES EX
MPEG AAC
STEREO
PRO LOGIC
DSP
L C R LFE
AUTO
SB CH ON MOVIE
MUSIC
OFF
L S S R S
AUTO
RF
DIGITAL
dB SIGNAL
SP A B
ANALOG
OFF: No Dynamic Range Control.
MID: A moderate amount of Dynamic Range
Control.
MAX: The most Dynamic Range Control available
is applied.
CHANNEL
−
CHANNEL
+
DTV ON/OFF BAND
D.ACCESS MPX CLASS
MENU TOP MENU TUNER EDIT
GUIDE SYSTEM
SETUP
AUDIO RETURN
ST
TUNE
MASTER
VOLUME
ST
TUNE
ENTER
1-6
3 EXIT should be selected (if it
isn’t use the
5∞ buttons to
select it) and press ENTER.
LOUDNESS MIDNIGHT TONE DNR ATT STEREO
TUNED
RDS
Hi-BIT/
MULTI-ROOM
SAMPLING
EON
RF ATT
MONO Neo :6
DIGITAL
DTS ES EX
MPEG AAC
STEREO
PRO LOGIC
DSP
L C R LFE
AUTO
SB CH ON MOVIE
MUSIC
OFF
L S S R S
AUTO
RF
DIGITAL
dB SIGNAL
SP A B
ANALOG
Dynamic Range Control is set. Go on to the next
setting.
You may need to experiment with different Dolby
Digital and DTS sources before you can use the
DYNAMIC RANGE CONTROL setting to suit your
low volume listening needs.
4 You are now finished with
EXPERT SETUP, EXIT should be
selected (if it isn’t use the
5∞
buttons to select it), press
ENTER.
LOUDNESS MIDNIGHT TONE DNR ATT STEREO
TUNED
RDS
Hi-BIT/
MULTI-ROOM
SAMPLING
EON
RF ATT
MONO Neo :6
DIGITAL
DTS ES EX
MPEG AAC
STEREO
PRO LOGIC
DSP
L C R LFE
AUTO
SB CH ON MOVIE
MUSIC
OFF
L S S R S
AUTO
RF
DIGITAL
dB SIGNAL
SP A B
ANALOG
5 EXIT should be selected (if it
isn’t use the
5∞ buttons to
select it), press ENTER.
6 Use the
5∞ buttons to select
EXIT, press ENTER.
The receiver returns to normal operation.
STANDBY/ON
MOVIE MUSIC
MULTI JOG
ENTER
STANDBY
PHONES SPEAKERS
SIGNAL
SELECT HI-BIT HI-SAMPLING SB CH
MODE SET UP RETURN
TONE TONE CONTROL BASS/TREBLE
BAND MIDNIGHT LOUDNESS MULTI JOG CONTROL
1-6
The default is OFF.
memo