Pioneer VSX-43TX - Manual (Page 76)

76
Fine Tuning Your System
5 Use the
5∞ buttons to move
through the different digital input
settings and press the ENTER
button.
LOUDNESS MIDNIGHT TONE DNR ATT STEREO
TUNED
RDS
Hi-BIT/
MULTI-ROOM
SAMPLING
EON
RF ATT
MONO Neo :6
DIGITAL
DTS ES EX
MPEG AAC
STEREO
PRO LOGIC
DSP
L C R LFE
AUTO
SB CH ON MOVIE
MUSIC
OFF
L S S R S
AUTO
RF
DIGITAL
dB SIGNAL
SP A B
ANALOG
The available digital input settings are:
DIGI-1: TV/SAT, DIGI-2: CD-R,
DIGI-3: DVD/LD, DIGI-4: CD
The selected setting will blink.
6 Use the
5∞ buttons select the
component that you hooked up
to that digital in. Press the
ENTER button.
LOUDNESS MIDNIGHT TONE DNR ATT STEREO
TUNED
RDS
Hi-BIT/
MULTI-ROOM
SAMPLING
EON
RF ATT
MONO Neo :6
DIGITAL
DTS ES EX
MPEG AAC
STEREO
PRO LOGIC
DSP
L C R LFE
AUTO
SB CH ON MOVIE
MUSIC
OFF
L S S R S
AUTO
RF
DIGITAL
dB SIGNAL
SP A B
ANALOG
If you're not sure which component is connected
to which digital in, look on the back of the
receiver and check the cables you connected.
7 Repeat steps 5-6 to change other
digital input settings.
8 When you're finished use the
5∞
buttons to select EXIT and press
ENTER.
This exits the DIGITAL-IN SELECT mode.
9 Use the
5∞ buttons to select
EXIT and press ENTER, again.
Then, use the
5∞ buttons to
select EXIT and press ENTER.
This exits the SYSTEM SETUP mode and returns
to normal operation.
memo
• The possible digital inputs that can be assigned are:
DVD/LD, TV/SAT, VCR1, VCR2, CD, CD-R, MD.
• If you assign a digital input to a certain function (for
example DVD/LD) then any digital inputs previously
assigned to that function will automatically be set to
OFF. This is because one function cannot be assigned
to two different places.
(If you are continuing from page 74 you can skip
the first two steps.)
1 Turn on the receiver, press the
RECEIVER button on the remote
control.
2 Press the SYSTEM SETUP
button.
3 Looking at the display on your
receiver, use the
5∞ buttons to
select INPUT ASSIGN. Press the
ENTER button.
LOUDNESS MIDNIGHT TONE DNR ATT STEREO
TUNED
RDS
Hi-BIT/
MULTI-ROOM
SAMPLING
EON
RF ATT
MONO Neo :6
DIGITAL
DTS ES EX
MPEG AAC
STEREO
PRO LOGIC
DSP
L C R LFE
AUTO
SB CH ON MOVIE
MUSIC
OFF
L S S R S
AUTO
RF
DIGITAL
dB SIGNAL
SP A B
ANALOG
4 DIGITAL-IN should be selected, if
not use the
5∞ buttons to select
it. Press the ENTER button.
LOUDNESS MIDNIGHT TONE DNR ATT STEREO
TUNED
RDS
Hi-BIT/
MULTI-ROOM
SAMPLING
EON
RF ATT
MONO Neo :6
DIGITAL
DTS ES EX
MPEG AAC
STEREO
PRO LOGIC
DSP
L C R LFE
AUTO
SB CH ON MOVIE
MUSIC
OFF
L S S R S
AUTO
RF
DIGITAL
dB SIGNAL
SP A B
ANALOG
MOVIE MUSIC
ENTER
SURROUND
MODE
STEREO/
DIRECT
ACOUSTIC
EQ
SB CH
MODE
INPUT
MIDNIGHT
MUTE
MENU TOP MENU TUNER EDIT
GUIDE SYSTEM
SETUP
AUDIO RETURN
MULTI CH
INPUT
ST
TUNE
MASTER
VOLUME
ST
TUNE
DVD/LD
ENTER
VCR 2
TV / SAT
C D
VCR/DVR TV CONT
TUNER RECEIVER
2
3-9
1
Assigning the Digital Inputs
If you did not hook up your digital equipment in accordance with the default settings for the digital inputs
(see page 16,18 & 21) you need to complete the procedure below. You have to do this in order to tell the
receiver what digital equipment is hooked up to which terminal so the buttons on the remote correspond
to what you have hooked up.
STANDBY/ON
MOVIE MUSIC
MULTI JOG
ENTER
STANDBY
PHONES SPEAKERS
SIGNAL
SELECT HI-BIT HI-SAMPLING SB CH
MODE SET UP RETURN
TONE TONE CONTROL BASS/TREBLE
BAND MIDNIGHT LOUDNESS MULTI JOG CONTROL
3-9 2
RETURN button