Panasonic BB-GT1540 - Manual (Page 31)

Making/Answering Calls (Handset)
31 For product assistance, visit www.panasonic.com/help
For A assistance, visit www.joip.com
Making calls
Important:
L
You can choose the landline or IP line
to make a call. Make sure to choose
the appropriate line for the phone
number.
L To call a Panasonic GLOBARANGE
phone, dial the A number
consisting of a # followed by 10 digits
(page 4).
Using the handset N
1
Dial the phone number.
L
To correct a digit, press {CLEAR}.
2 To make a landline call, press
{
TEL}.
To make a A internet call, press
{
IP}.
3 When you finish talking, press
{
OFF} or place the handset on the
base unit or charger.
Note:
L
l To make calls from your A
number to landline and cellular phone
numbers via your IP line, you need to
subscribe to the appropriate service at
www.joip.com
When calling, you may not hear
ringtones from your receiver/speaker
for a while as the unit accesses the
destination phone number. This is
normal, please wait.
L
You can also make a call by pressing
{
CALL} in step 2. The line set for line
selection mode is automatically
selected (page 28). When a A
number is dialed (page 4), the IP line
is selected.
L l If it takes some time to call the
number in step 2, press {#} to call it
immediately.
Using the speakerphone
1 Dial the phone number, and press
{s}
.
L The line set for line selection
mode is automatically selected
(page 28). When a A number
is dialed (page 4), the IP line is
selected.
L Speak alternately with the other
party.
2 When you finish talking, press
{
OFF}.
Note:
L
Use the speakerphone in a quiet
environment.
L To switch to the receiver, press {s}.
Adjusting the receiver/speaker
volume
Push the joystick up or down while
talking.
Making a call using the redial list
The last 10 phone numbers dialed are
stored in the redial list (each 48 digits
max.). V (landline) and j (IP line)
indicate which line you made the call on.
1
{ REDIAL}
2
{V}
/{^}: Select the desired phone
number.
3 Press {CALL}.
L
The indicated line is selected.
L You can also select the line by
pressing {TEL} or {IP}.
Note:
L
The caller’s name is not stored in the
redial list when calling back a number
from the caller list.
Erasing a number in the redial list
1
{ REDIAL}
GT15xx.book Page 31 Monday, June 4, 2007 8:52 AM