Panasonic BB-GT1540 - Manual (Page 50)

Programming
50 For product assistance, visit www.panasonic.com/help
For A assistance, visit www.joip.com
Programming using the direct commands N
1
{ MENU} i {#}
2 Enter the desired feature code.
3 Enter the desired setting code. i {SAVE}
L
This step may vary depending on the feature being programmed.
4
{ OFF}
Note:
L
In the following table, < > indicates the default setting.
L If you make a mistake or enter the wrong code, press {OFF}, then start again from
step 1.
Feature Feature code Setting code Page
Alarm { 7}{2}{0} – 54
Auto Intercom { 2}{7}{3} { 1}: On (Ringer On)
{ 2}: On (Ringer Off)
{ 0}: <Off>
67
Auto talk
*1
{ 2}{0}{0} { 1}: On {0}: <Off> 32
Display language {
1}{1}{0}
{
1}: <English>
{ 2}: Español
27
Date and time
*2
{
1}{0}{1} – 27
Deregistration { 1}{3}{1} – 75
Handset name { 1}{0}{4} – 54
HS registration
(Handset registration) { 1}{3}{0} – 75
Interrupt tone
*3
(Handset)
{ 2}{0}{1} { 1}: <On>
{ 0}: Off
–
Interrupt tone
*2*3
(BB-GT1540 base unit)
{*}{ 2}{0}{1} –
IP/TEL select
(Handset) { 2}{5}{0} { 1}: IP
{ 2}: <TEL>
28
IP/TEL select *2
(BB-GT1540 base unit)
{*}{ 2}{5}{0} 28
Key tone *4
{ 1}{6}{5} { 1}: <On> {0}: Off –
LCD contrast
(Display contrast) { 1}{4}{5} { 1}-{6}: Level 1–6 <3> –
Message alert { 3}{4}{0} { 1}: On {0}: <Off> 64, 66
GT15xx.book Page 50 Monday, June 4, 2007 8:52 AM