Pride Mobility 6000Z 4S - Manual (Page 18)

18 www.pridemobility.com Quantum 6000Z Series
I I I . Y O U R P O W E R C H A I R
Electrical Components
The electrical components consist of the controller assembly, the batteries, and the motors. The batteries, motors,
and controller power module (if equipped) are located on the power base assembly. The controller is located on
the seat assembly. Connectivity between the controller and the motors, batteries, and the battery charger is pro-
vided by one or more wiring harnesses. See figure 7.
Controller Harness Connector: This is where the controller connects to the power base. Each controller uses a
different type of harness. Regardless of which type of controller is used, the harness must be secured to the
assembly and not allowed to drag on the floor.
Figure 6. The Quantum 6000Z Series Power Base
MANUAL FREEWHEEL LEVER
REAR SEAT MOUNT CONNECTORS
FRONT SEAT MOUNT CONNECTORS
FRONT COVER
REAR SHROUD FASTENER
(FASTENER ON OPPOSITE SIDE
NOT SHOWN)
REAR SHROUD