Paradyne T1 Access Mux 916x - Manual (Page 11)

11
User Interface (continued)
Configuration Option Settings Default in [Bold]
External Device (COM Port)
External Device Commands [Disable], AT, Other
Dial-In Access 6 Enable, [Disable]
Connect Prefix 7 ASCII text entry, Clear
Connect Indication String 7 ASCII text entry, Clear
Escape Sequence 7 ASCII text entry, Clear
Escape Sequence Delay (Sec) 7 [None], 0.2, 0.4, 0.6, 0.8, 1.0
Disconnect String 7 ASCII text entry, Clear
Telnet/FTP Sessions
Telnet Session Enable, [Disable]
Telnet Login Required Enable, [Disable]
Session Access Level [Level-1], Level-2, Level-3
Inactivity Timeout Enable, [Disable]
Disconnect Time (Minutes) 1 – 60 [5]
FTP Session Enable, [Disable]
FTP Login Required Enable, [Disable]
6 Only shown when External Device Commands is set to Other or AT.
7 Only shown when External Device Commands is set to Other.
Alarm
Configuration Option Settings Default in [Bold]
ASCII Alarm Messages Com Port, [Disable]
Alarm & Trap Dial Out Enable, [Disable]
Trap Disconnect [Enable], Disable
Call Retry Enable, [Disable]
Dial-Out Delay Time (Min) 1 – 10 [5]
Alternate Dial-Out Directory [None], 1 – 5
System Alarm Relay Enable, [Disable]