Paradyne T1 Access Mux 916x - Manual (Page 12)

12
Management and Communications
Configuration Option Settings Default in [Bold]
Communication Protocol
Node IP Address 1 [000.000.000.000] – 223.255.255.255, Clear
Node Subnet Mask [000.000.000.000] – 255.255.255.255, Clear
Default Network Destination [None], COM, FDL1, FDL2, DDL, EDL ss-p
Communication Port IP Address 1 [000.000.000.000] – 223.255.255.255, Clear
Communication Port Subnet Mask [000.000.000.000] – 255.255.255.255, Clear
Communication Port Link Protocol [PPP], SLIP
Alternate Communication Port IP
Address
1
[000.000.000.000] – 223.255.255.255, Clear
Alternate Communication Port
Subnet Mask [000.000.000.000] – 255.255.255.255, Clear
General SNMP Management
SNMP Management Enable, [Disable]
Community Name 1 ASCII text entry [Public], Clear
Name 1 Access [Read], Read/Write
Community Name 2 ASCII text entry, [Clear]
Name 2 Access [Read], Read/Write
SNMP NMS Security
NMS IP Validation Enable, [Disable]
Number of Managers 1 – 10 [1]
NMS n IP Address [000.000.000.000] – 223.255.255.255, Clear
Access Level [Read], Read/Write
1 The first byte cannot be set to 0 nor 127. However, the null address of
0.0.0.0 is valid after performing a Clear.