Panasonic DMR-ES40V - Manual (Page 41)

Convenient functions
41
VQT0R73
This description shows the initial settings for the unit. For
details on menu operation. (
l 40)
≥Underlined items are the factory default settings.
≥ indicates settings effective for both DVD and VHS.
≥ indicates settings effective for DVD only.
∫ Channel
Signal Source (RF IN)
( l 16)
Select to suit the type of antenna you are using.
[Antenna] [CableTV]
Set Channels Automatically ( l 16)
Preset Channel Captions ( l 17)
Manual Channel Captions ( l 17)
VCR Plus i Ch. Setting ( l 16)
∫ Setup
Off Timer
Select how long the unit remains on when it is not being used.
[2 Hours] [6 Hours] [Off]
Remote Control Code ( l 18)
[Set Code 1] [Set Code 2] [Set Code 3]
Clock Settings
Press [ENTER] to show the following settings.
Set Clock Automatically ( l 44)
Set Clock Manually ( l 44)
Adjust Time Zone ( l 44)
This corrects the time set in Auto Clock Setting.
The status is not displayed on the Set Up menu when the Auto
Clock Setting is not set.
[ j 1] [0] [ i 1]
Quick Start
About 1 second after turning on the unit, you can start recording to
DVD-RAM.
Power consumption in standby mode increases when Quick Start is
set to “On”. The unit performs self maintenance for a few minutes
every morning starting at 4:00 am. The unit’s buttons, including
[POWER
Í/I], do not work during this self maintenance. (Self
maintenance does not start if the unit is on, or a scheduled recording
is taking place, at this time.)
[On] [Off]
Restore Default Settings
This returns SETUP menus to default settings, except for the clock,
channel settings, ratings level, and on-screen language.
[Yes] [No]
∫Disc
Settings for Playback
Press [ENTER] to show the following settings.
Ratings ( l 40)
Set a ratings level to limit DVD-Video play.
Setting ratings (When level 8 is selected)
[8 No Limit]: All DVD-Video can be played.
[1] to [7]:
Prohibits play of DVD-Video with corresponding
ratings recorded on them.
[0 Lock All]: Prohibits play of all DVD-Video.
Changing ratings (When level 0 to 7 is selected)
[Unlock Recorder] [Change Password]
[Change Level] [Temporary Unlock]
Audio Language
[English] [French] [Spanish] [Original] [Other ¢¢¢¢]
Subtitle Language
[Automatic] [English] [French] [Spanish] [Other ¢¢¢¢]
Menu Language
[English] [French] [Spanish] [Other ¢¢¢¢]
Choose the language for audio, subtitles and disc menus. [DVD-V]
≥If a language which is not recorded is selected, or if languages
are already fixed on the disc, the language set as the default on
the disc will be played instead.
Original
The original language of each disc will be selected.
Other ¢¢¢¢
This is the language code setting.
Input a code number with the numbered buttons. (
l 43,
“Language code list”)
Automatic
If the language selected for “Audio Language” is not available,
subtitles of that language will automatically appear if available on
the disc.
Settings for Recording
Press [ENTER] to show the following settings.
Recording Time in EP Mode
Select the maximum number of hours for recording in EP mode
(
l 24, “Recording modes and approximate recording times”).
[EP-Extended Play (6H)] [EP-Extended Play (8H)]
Summary of settings
/
/
/
EP-Extended
Play (6H) You can record for 6 hours on an unused 4.7 GB
disc.
EP-Extended
Play (8H) You can record for 8 hours on an unused 4.7 GB
disc.
DVD
Co
nve
n
ie
nt
fu
nc
tio
n
s
ES40VP&PC.book 41 ページ ２００５年９月６日 火曜日 午前１０時２３分