Panasonic DMR-ES40V - Manual (Page 52)

52
VQT0R73
Convenient functions
The unit automatically records special index signals on the tape
every time a recording is started. The index search function makes
use of these index signals to let you find the beginning of a desired
program quickly and easily.
Preparation
≥Insert a recorded video cassette.
While stopped or during normal play
Press [ : ] or [ 9].
≥Each press increases the number of skips.
∫ To cancel the index search
Press [ ∫, STOP].
Note
≥Up to 20 index signals can be searched for in both directions.
≥If you press either one of the buttons too much, you can control the
number of skips by pressing the opposite button.
≥The figure on the display decreases by 1 each time an index signal
is located.
≥This feature may not work correctly if the index signals are too
close together. Make recordings of at least 5 minutes.
[1] While stopped
Press [FUNCTIONS].
[2] Select “Other
Functions” with [
3, 4]
and press [ENTER].
[3] Select “SETUP” and
press [ENTER].
[4] Select “VHS” with [ 3,
4] and press [2, 1].
[5] Select an item to be
changed with [
3, 4]
and press [ENTER].
[6] Select an option with
[
3, 4] and press [ENTER].
∫To return to the previous screen
Press [RETURN]. Even if you have changed an option, the change is
not activated until you press [ENTER].
∫To exit the screen
Press [RETURN] several times.
For your reference
≥The settings remain intact even if you switch the unit to standby.
This description shows the initial settings for the unit. For
details on menu operation (
l above).
≥ Underlined items are the factory default settings.
∫VHS
TAPE SELECT
Set the length of tape you are using so the unit can show the correct
remaining time.
[T120] [T160] [T180]
[T120]: T30, T60, T90 and T120 tapes
[T160]: T140 and T160 tapes
[T180]: T180 tapes
JET SEARCH ( l 47)
Set the speed for JET SEARCH when playing EP and VP tapes.
≥It is possible to view the picture recorded in EP or VP mode at
approx. 27 or 35 times speed.
[ k27] [k35] --------
≥Select [k27] if the picture is poor at [k35].
Preparation
≥Select the unit viewing channel on the TV.
≥Press [VHS].
VHS Index Search System (VISS)
∫ Index signals are recorded in the following cases.
≥When a recording is started by pressing [¥, REC].
≥When scheduled recording is started.
SKIP/INDEX
SLOW/
SEARCH REW FF
PLAY
S
SCHEDULE
OPERATION
SELECT
DVD ERASE REC REC MODE ADD/DLT
POWER
TIME SLIP
FUNCTIONS DIRECT NAVIGATOR
TOP MENU
RETURN
CM SKIP CANCEL/RESET
VOLUME CH INPUT SELECT
STATUS DISPLAY
AUDIO
TV
TV/VIDEO
VHS DVD
TRACKING/V-LOCK
SUB MENU
DVD/VHS POWER
VCR Plus+
COPYING
VHS DVD
CREATE
CHAPTER VCR/TV
JET REW
INDEX
REC
TOP MENU
VHS
RESET
VHS
FUNCTIONS
AUDIO
STATUS
∫
3, 4, 2, 1
ENTER
:, 9
µ
STATUS
AUDIO
RETURN
RETURN
C
6 12
VHS cassette
Changing the unit’s settings
1 Summary of settings
FUNCTIONS VHS
VHS
Write Protection Off
SCHEDULE
VCR Plus+ 1 2 3
Other Functions Return
SETUP
ENTER
Playback
Schedule
TAPE SELECT
Channel
Setup
Disc
Video
Audio
Display
TV Screen
VHS
JET SEARCH
T120
k35
SETUP
VHS
ES40VP&PC.book 52 ページ ２００５年９月６日 火曜日 午前１０時２３分