Planet Technology Internet Telephony PBX System IPX-1900 - Manual (Page 24)

Trunk Management – Gateway Trunk
Gateway Trunk Setting allows IP PBX makes VoIP calls to external Gateway by peer-to-peer mode. If
the FXO ports of external Gateway have connected with PSTN lines, the user can make outgoing
PSTN calls via external Gateway by this function.
Figure 3-13. Gateway Trunk setting
IP
Destination IP Address is the IP address of the destination
Gateway that owns this phone number.
Port
Port is port of the destination Gateway use. (Default is 5060)
Table 3-11. Gateway Trunk setting description
Trunk Management – Trunk Group
Trunk Group is defines the leading digit of the call out dialing number through SIP / FXO / Gateway
Trunks of the same type between two given points. The IP PBX will in according to the leading digit to
determine to use which SIP or Gateway Trunks for outgoing route.
Figure 3-14. Trunk Group setting - 1
Press “more” to show the Service Provider Number under the group.
Figure 3-15. Trunk Group setting - 2
Figure 3-16. Trunk Group more information
24