Planet Technology Internet Telephony PBX System IPX-1900 - Manual (Page 57)

5
Chapter 5
Management
Admin Account
The administrator account can access the management interface through the web browser.
Figure 5-1. Management settings
Administrator Name
Assign a name to represent the administrator account. Maximum 16
characters. Legal characters can be the upper letter “A” to “Z”, lower
letter “a” to “z”, digit number “0” to “9” and an underscore sign¡ ”_”.
Administrator
Password
Assign an administrator password. Maximum 16 characters and
minimum 6 characters with mix of digits and letters characters. Legal
characters can be the upper letter “A” to “Z”, lower letter “a” to “z”,
digit number “0” to “9” and an underscore sign”_”.
Confirm Password
Enter the administrator password again. Remote Administrator
allows the device to be configured through the WAN port from the
Internet using a web browser. A username and password is still
required to access the browser-based management interface.
Remote Administration
Enable/Disable to access from remote site. Default setting is
“Disable”.
Http port for remote
If you allowed the access from the remote site, assign the http port
used to access the IP-PBX. Default port number is “8080”.
Remote administration
only from IP
Internet IP address of the computer that has access to the IP-PBX.
Assign the legal IP address.
Example: http://x.x.x.x:8080 where as x.x.x.x is the WAN IP
address and 8080 is the port used for the Web-Management
interface.
Table 5-1. Management description