Planet Technology Internet Telephony PBX System IPX-1900 - Manual (Page 59)

Time Zone
Choose your time zone, Default is (GMT+8:00) Beijing,
Singapore, Taipei.
Daylight Saving
Enable / Disable. Default is Disabling, time during which clocks
are set one hour ahead of local standard time; widely adopted
during summer to provide extra daylight in the evenings.
NTP Update Interval
Default is 24 hours; This is used to select the frequency of. NTP
updates.
NTP Server 1
Default is “pool.ntp.org”, NTP Server address.
NTP Server 2 Default is empty.
Table 5-3. Date/Time-NTP time description
Ping Test
This useful diagnostic utility can be used to check if a computer is on the Internet. It sends ping packets
and listens for replies from the specific host. Enter in a host name or the IP address that you want to
ping (Packet Internet Groper) and click Ping. Example: www.yahoo.com or 209.131.36.158
Figure 5-4. Ping test settings
Ping Destination Assign a legal IP address.
Table 5-4. Ping test description
Save & Restore
All settings can be saving to a local file. Pervious device configuration can also be restored by upload a
local file back to the device.
Figure 5-5. Save/Restore settings
59