Pioneer VSX-819H-S - Manual (Page 38)

Listening to your system 05
38
En
• With a 7.1-channel surround system, audio
signals that have undergone matrix
decoding processing through surround
back channel processing to which the Up
Mix function is added are output from the
surround back speakers.
• Press RECEIVER, then press SB CH
repeatedly to cycle the surround back
channel options.
Each press cycles through the options as
follows:
• SB CH ON – Matrix decoding processing for
generating the surround back component
from the surround component is turned on.
• SB CH AUTO – Matrix decoding
processing for generating the surround
back component from the surround
component is switched automatically.
Matrix decoding processing is only
performed when surround back channel
signals are detected in the input signals.
• SB CH OFF – Matrix decoding processing
for generating the surround back
component from the surround component
is turned off.
Setting the Up Mix function
In a 7.1-channel surround system with
surround speakers placed directly at the sides
of the listening position, the surround sound of
5.1-channel sources is heard from the side.
The Up Mix function mixes the sound of the
surround speakers with the surround back
speakers so that the surround sound is heard
from diagonally to the rear as it should be.
1
• Using the Up Mix function is effective when
the speakers in the 7.1-channel surround
system are set up as recommended in the
example on page 24.
• Depending on the positions of the speakers
and the sound source, in some cases it
may not be possible to achieve good
results. In this case, set the setting to
OFF.
1 Switch the receiver into standby.
2 While holding down the PRESET + on the
front panel, and hold the  STANDBY/ON for
about two seconds.
UP MIX: OFF appears and the Up Mix function
turns off. If you want to turn this function on,
perform steps 1 and 2 again.
• When set to ON, the UP MIX indicator on
the front panel lights.
INPUT SELECT SOURCE
INPUT
TV CONTROL
RECEIVER
ZONE 2
ON/OFF
1
4
7
SB CH
S.RETRIEVER
HDD
2
5
8
PHASE
EQ
DISPLAY
SLEEP
MIDNIGHT
DVD
3
6
9
CH
CH
CH SELECT
VCR
RECEIVER
Note
1 • Set to ON regardless of this setting when playing DTS-HD signals.
• May automatically be set to OFF even when set to ON, depending on the input signal and listening mode.
?
C SW FL FR
SL SR
SBL SBR SBL SBR
C SW FL FR
SL SR
Up Mix OFF Up Mix ON
VSX-819H_RLF.book 38 ページ ２００９年１月２０日 火曜日 午前１０時３６分