Plasmon MOD 910 - Manual (Page 9)

(4) Packing
Pack the unit after you have removed the disk.
Put the device in the anti-static or plastic bag.
It is desirable to use the original shock-absorbing material and packing
box used when the unit was delivered to you. If not, use a box with a
shock-absorbing structure that will prevent direct impacts to the device.
In the case of the internal unit, protect the surfaces and interface
connector against possible damage and use an anti-static bag.
(5) Transportation
! Transport the unit in a well-packaged condition, with the upside
facing up.
! Transport the unit as little as possible after unpacking, always
using the shock absorbing material to avoid impact and vibration.
When carrying the unit after unpacking, keep it in the horizontal
plane.
(6) Storage
• Use the moisture-proof packing material for storage.
• The storage environment should meet the non-operating
environmental requirement as specified in Appendix E.
! Do not expose the unit to radical changes in temperature, which
could cause condensation.
viii
97705183 A
User Manual